• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

PCV Valve blow by

  • Thread starter Thread starter 02_TruBlu
  • Start date Start date Jun 15, 2005
0

02_TruBlu

Founding Member
Sep 19, 2002
54
0
0
Pittsburgh
Jun 15, 2005
#1
  • Jun 15, 2005
  • #1
I searched the threads, and didn't find anything pertaining to newer cars. I am at 50k miles right now and have just experience PCV valve blow by for the second time on this car. The first time was under 30k miles and I replaced the valve at that point. Do I need to keep replacing this thing every ~25k? What is causing this happen? My car in not under boost, all I have are UDP's and CAI.

TIA
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 16, 2005
#2
  • Jun 16, 2005
  • #2
It is the nature of the beast. It is worse for motors with boost but, NA modular motors do it as well. The easiest solution is an air/oil separator in the PCV line from the PCV valve to the Intake. here is a pic of my installation and another pic of what it trapped just after 60 miles.

In the first picture you can see the line running from the (Motorcraft) PCV valve to the separator which I temporarily mounted to the wiring harness running along the firewall and then the line runs to the intake. It was an easy 10 minute install. I bought the separator at Lowes as well as the 3/8 barbed fittings and the 3/8 fuel line tubing at Autozone. All together I think I spent maybe $20.

Here is a great thread from Modular Depot on separators.
http://www.modulardepot.com/forums/showthread.php?s=&threadid=35895&highlight=steeda+seperator




 
0

02_TruBlu

Founding Member
Sep 19, 2002
54
0
0
Pittsburgh
Jun 16, 2005
#3
  • Jun 16, 2005
  • #3
Thanx alot rjstaaf. Good description and good pics. In my search I read about the seperator, but since it was talked about with the 5.0 guys, didn't know if it was for us too. Looks like I have a new mod coming...
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 16, 2005
#4
  • Jun 16, 2005
  • #4
That's a great post. I think I will do that one this weekend as well.
 

RandyStinchcomb

New Member
May 25, 2005
1,159
3
0
Randallstown, Md
Jun 16, 2005
#5
  • Jun 16, 2005
  • #5
one other thing is aftermarket PCV valves can cause problems, yeah I work at a Ford dealer(selling parts is my job) but we have seen our share of problems wth people using aftermarket anything. IAC, O2's, sparkplugs, PCV valves ect, ect. Ford designs a part to fit wthin certian parameters and the aftermarket widens those parameters to fit mulitply appts, so in the case of a PCV if your using aftermarket, it just might be drawning to much vacuum thru it because of the orifice size. I preach this day-in & day-out about buying aftermarket parts, they may fit like OEM but they don't funcition like OEM parts are designed to.
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 16, 2005
#6
  • Jun 16, 2005
  • #6
I posted on this subject a while back and someone replied that steeda also sells a complete kit to take care of the problem..myself ..I will be buying the seperator at wally world and then getting the fittings at a hardware store
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 16, 2005
#7
  • Jun 16, 2005
  • #7
If you go to Steeda's website and look at the pic, they probably went to Lowes and picked up the parts there as well The problem is they want $60 for it when it shouldn't cost anymore than $20 or so. Nice markup huh.

Here is a pic from their website.
 
0

02_TruBlu

Founding Member
Sep 19, 2002
54
0
0
Pittsburgh
Jun 16, 2005
#8
  • Jun 16, 2005
  • #8
Steeda does sell a kit 9646g6 (http://www.steeda.com/PR/Mustang/PR/555-3710.htm) but it is $60 and rjstaaf's looks better.

Thanks for the input Randy, but in my case, I bought the replacement PCV from Ford.

Since I just had blow by, do I need a new one, or can I just clean it up and keep using?
 

RandyStinchcomb

New Member
May 25, 2005
1,159
3
0
Randallstown, Md
Jun 16, 2005
#9
  • Jun 16, 2005
  • #9
02_TruBlu said:
Steeda does sell a kit 9646g6 (http://www.steeda.com/PR/Mustang/PR/555-3710.htm) but it is $60 and rjstaaf's looks better.

Thanks for the input Randy, but in my case, I bought the replacement PCV from Ford.

Since I just had blow by, do I need a new one, or can I just clean it up and keep using?
Click to expand...


ok, I understand that but did they sell you the right one? I had someone over at Modular Depot that thought ther dealer sold them the right part and as it turns-out they got one for a DOHC and the have a SOHC Gt.
 

Wikkdgt

New Member
Jul 17, 2003
445
0
0
Cincinnati, OH
Jun 16, 2005
#10
  • Jun 16, 2005
  • #10
Can someone explain how you know if you have blow by from your PCV Valve? thanks.
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 16, 2005
#11
  • Jun 16, 2005
  • #11
Wikkdgt said:
Can someone explain how you know if you have blow by from your PCV Valve? thanks.
Click to expand...


a smokey exhuast every now and then and using 1/2 a quart of oil between changes even tho the mototr is in great shape..its becuase the valve sucks so hard under throttle it suck oil form the valve cover with it..VERY common
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 16, 2005
#12
  • Jun 16, 2005
  • #12
A quick way to check is to just to check for oil in the throttle body.
 
0

02_TruBlu

Founding Member
Sep 19, 2002
54
0
0
Pittsburgh
Jun 16, 2005
#13
  • Jun 16, 2005
  • #13
Randy: Yes I am sure. I looked up the number myself before hand and then checked it with what the dealer showed. It took a week to get it as they had the DOHC ones but none for GT's.

"a smokey exhuast every now and then" & "oil in the throttle body"

Hmmm.. you two got me worried now. I have oil on my valve cover and some got on the header. That's how I knew, I could smell it while driving. The first time it happened, smoke came up from the hood and then a cloud when I opened the hood. Almost started crying as I thought I blew the motor or something.
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 16, 2005
#14
  • Jun 16, 2005
  • #14
Actually if the seal around the PCV is bad...liek the gromet on it..I could see it maybe sucking up oil (blow by) and it sucking hard enough to pass by that seal maybe?
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Jun 16, 2005
#15
  • Jun 16, 2005
  • #15
or pull the hose off ans check for oil. i didnt have any in the TB or plenum, but i did have it inside the hoses. knowing lowes sells the seperator, i'll get it done this weekend with my clutch cable, quad, shift handle, and FW adjuster.

Torinalth
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 16, 2005
#16
  • Jun 16, 2005
  • #16
Torinalth said:
or pull the hose off ans check for oil. i didnt have any in the TB or plenum, but i did have it inside the hoses. knowing lowes sells the seperator, i'll get it done this weekend with my clutch cable, quad, shift handle, and FW adjuster.

Torinalth
Click to expand...

Another good point there also...How much do they run at lowes anyway? You can get a nice shiny blue one at wally world for under 12 bux..jsut not sure exactly what the fittings will cost..
 

ACSPONY

20+ Year Stangneter
Oct 10, 2004
711
2
19
Ohio
Jun 16, 2005
#17
  • Jun 16, 2005
  • #17
rjstaaf- where did you get the oil separator? I was looking at Steeda's but it makes more sense to do the fittings/hoses myself and save some dinero.
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 16, 2005
#18
  • Jun 16, 2005
  • #18
I got it and the 3/8" barbed fittings at Lowes. I got the 3/8" fuel line at Advance Auto. All together, cost me about $20.
 

ACSPONY

20+ Year Stangneter
Oct 10, 2004
711
2
19
Ohio
Jun 16, 2005
#19
  • Jun 16, 2005
  • #19
Great, I didn't know they sold separators at Lowes. $20>$60
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 16, 2005
#20
  • Jun 16, 2005
  • #20
Yup, this application is designed for air compressors. You will find them in the power tool section with the compressor accessories.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
370
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
R
For Sale 2008 Mustang Bullitt for sale Richmond Hill, ON, Canada L4C 0S3
  • ROHDRNNR
  • Jun 10, 2026
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
353
S197 Mustangs For Sale (2005-14) Jun 10, 2026
ROHDRNNR
R
G
  • Poll Poll
I got a free Mustang from Grandma
  • GrannysMustang
  • Mar 4, 2026
  • The Welcome Wagon
Replies
14
Views
607
The Welcome Wagon Mar 6, 2026
Realmongo
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
499
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?