pcv valve replacement...

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#1

• Sep 20, 2004

• #1

hey
after taking my lower intake manifold off i noticed that where the pcv valve goes nothing is there, its just a wire mesh screen, so i went to the auto parts store and bought a new pcv valve but it doesnt fit in right, the diameter of the the pac valve is too small for the hole on the manifold where the screen is, which made me wonder if maybe there is a little rubber fitting that slides over it or something so it can fit in the larger diameter hole on the intake manifold..does anyone know where i can get one of these or what im talking about?

 

S

smac61

Founding Member

May 28, 2002

294

0

17

SC

Sep 20, 2004

#2

• Sep 20, 2004

• #2

There is supposed to be a rubber grommet in the hole. Wire mesh on the bottom, PCV on top. Not sure, but the local parts store should have it. The wire mesh is supposed to be replaced periodically also, but it can be a pain to get out sometimes.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Sep 20, 2004

#3

• Sep 20, 2004

• #3

Yep you need a pcv grommet...I would go ahead and get a new mesh screen, grommet, pcv valve, and hose (that connects to back driver side of upper intake)...

 

NeVeRLiFt

Founding Member

Sep 29, 2002

63

0

6

In the shadows of the Megacorporations

Sep 20, 2004

#4

• Sep 20, 2004

• #4

I would get the pcv valve replaced and working before driving the car hard.

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#5

• Sep 20, 2004

• #5

ok hey thanks guys, i appreciate, ill get one of those grommets and wire meshes asap. So the pcv valve hose connects to the back side of the upper intake??? Is there something i can look for back there?

by the way what does the pcv valve do?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Sep 20, 2004

#6

• Sep 20, 2004

• #6

deftsound said:

ok hey thanks guys, i appreciate, ill get one of those grommets and wire meshes asap. So the pcv valve hose connects to the back side of the upper intake??? Is there something i can look for back there?

by the way what does the pcv valve do?

Click to expand...

Yeah...if you look from the drivers side fender underneath the upper intake there should be a "two-way" fitting screwed into the bottom of your upper intake...the open end facing the firewall is where the pcv hose connects to the pcv valve...and the other open end (facing the radiator) makes a curve with the hose up to the front of the upper intake...I hope that made sense...I think you will see it once you get that new hose...

Good Luck

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#7

• Sep 20, 2004

• #7

ok thanks, il check that out tonight when i mess with my timing which is completely off right now because stupid me didnt mark where the distributor was when i took it off

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#8

• Sep 20, 2004

• #8

ok thanks, il check that out tonight when i mess with my timing which is completely off right now because stupid me didnt mark where the distributor was when i took it off

 

NeVeRLiFt

Founding Member

Sep 29, 2002

63

0

6

In the shadows of the Megacorporations

Sep 20, 2004

#9

• Sep 20, 2004

• #9

The PCV Valve opens when pressure builds up in the motor. Without it you will blow your oil pan gasket out or blow your dip stick up and oil will spray everywhere making a mess.

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#10

• Sep 20, 2004

• #10

and i suppose not having one could effect the idle of the engine and gas mileage?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Sep 20, 2004

#11

• Sep 20, 2004

• #11

deftsound said:

and i suppose not having one could effect the idle of the engine and gas mileage?

Click to expand...

Well I'm sure the loss of crankcase pressure (that mesh filter is probably making it act like a vacuum leak)...that it would effect the above things...like the idle and efficiency of the air/gas mixture being burned...

 

R

ratrapp

New Member

Apr 24, 2004

510

0

0

buena vista,va

Sep 20, 2004

#12

• Sep 20, 2004

• #12

go get the stuff from your local ford dealer,it'll fit much better than the parts store ones anyway.i tried a purolator one and it wouldn't stay in even with a new grommet and screen.i installed a motorcraft one and it fit like a glove.

 

V

virgostang94

New Member

Mar 12, 2004

20

0

0

Norfolk, VA

Sep 20, 2004

#13

• Sep 20, 2004

• #13

pcv valve

I noticed in some pictures that some people have two vacuum hoses branching out from their pcv valve. I only have one, and it goes to my upper intake manifold. Where does the other one go???

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 20, 2004

#14

• Sep 20, 2004

• #14

the guys at oreillys told me that second little valve doesnt go anywhere in most cases and its ok to just cap it off...

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Sep 20, 2004

#15

• Sep 20, 2004

• #15

If your talking about the little elbow (looks like an "F")...I believe you just rubber cap it off on the top one?

Mine don't have it...I just have one hose to the pcv valve...

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Sep 20, 2004

#16

• Sep 20, 2004

• #16

i did not read this whole thing - if you have an aftermarket valve with two fittings (normally at a 90 angle from the valve), you can break that off to reveal one male fitting which should hook right up to your existing hose. the aftermarket valves are made to fit a bunch of applications, hence the extra fittings.

good luck.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Sep 20, 2004

#17

• Sep 20, 2004

• #17

I know my motorcraft pcv valve came with that "f-fitting"...going to change it out when I redo the valves and put new valve covers on...but I'm just going to trash it because my car didn't have one on it to begin with...

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Sep 21, 2004

#18

• Sep 21, 2004

• #18

well thanks for all the help guys, i have 5 tests this coming week so hopefully if im not studying ill have time to screw with the car