• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

PCV Valve

  • Thread starter Thread starter asecretfile
  • Start date Start date Apr 14, 2008

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 14, 2008
#1
  • Apr 14, 2008
  • #1
Tried a search but didnt find a specific answer

If I leave the PCV valve in my 87 GT can it just be vented without the hose going into the manifold if I cap the manifold fitting?

thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 14, 2008
#2
  • Apr 14, 2008
  • #2
Huh?

A PCV valve is a check valve of sorts. There's a secondary line that allows air back into the crankcase (and helps at WOT a little).

You can run into a situation with inadequate air ingress abilities or a vac leak/unmetered air situation with a butchered PCV system. If you have a blower (no sig), you might want to go to closed breathers.

Good luck.
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 14, 2008
#3
  • Apr 14, 2008
  • #3
basically what I was trying to ask is...is it ok to run the pcv valve out to the atmosphere and not to the intake

thanks
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Apr 14, 2008
#4
  • Apr 14, 2008
  • #4
I don't believe it will work that way. You could probably leave it open, but you run the risk of debris entering the engine via the opening. The reason I don't believe it would work is because it's a check valve, and it relies on the vacuum source from the intake to open the valve. If it were to suck oil up, then the valve would close when it floats on the oil, but otherwise, it would sit in a closed position without the vacuum.
 
You must log in or register to reply here.

Similar threads

P
Vacuum
  • ProTechAutoServices
  • Aug 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
340
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
A
Catch can questions.
  • AngryH58
  • Sep 26, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
171
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2026
squeak93
B
Fuel 1990 installing edelBrock intake
  • Beaker
  • Oct 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
336
Fox 5.0 Mustang Tech Oct 6, 2026
Noobz347
P
I need definitive heater valve and AC expansion valve answers
  • PurAU
  • Sep 26, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
250
1965 - 1973 Classic Mustangs -General/Talk- Oct 1, 2026
GypsyR
G
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
373
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?