PI Intake swap done - problems

R

Ready4this96

New Member

Dec 11, 2003

105

0

0

Clinton Twp., MI

Apr 3, 2004

#1

• Apr 3, 2004

• #1

I just finished the intake swap on my car but I have 2 problems. First off the car is running REALLY rough, when you pull the connector off the injector on one of the injectors it runs the same like nothing happened so I think either its a bad injector or connection or something. 2nd is I looked under the car after it was leaking and I saw a big puddle of coolant dripping from like the rear of the car. I need you help please!

Tyler

 

R

Roger_4.6_96

Founding Member

Jul 16, 2002

1,209

0

0

Reno,NV

Apr 3, 2004

#2

• Apr 3, 2004

• #2

time to put old intake on

 

slvrbullIT

New Member

May 27, 2003

635

0

0

Dallas, TX

Apr 3, 2004

#3

• Apr 3, 2004

• #3

i never did understand how the square holes lined up with the circle ones

 

R

Ready4this96

New Member

Dec 11, 2003

105

0

0

Clinton Twp., MI

Apr 3, 2004

#4

• Apr 3, 2004

• #4

The old one is cracked

 

T

tangerine

Member

Apr 6, 2003

555

0

16

millen, ga

Apr 3, 2004

#5

• Apr 3, 2004

• #5

If it is coming out the back then you are having the same problem I did. I finially got pissed at it and put just about a whole bottle of red rtv on it. put it around every hole. It will seal up. on the injector I don't know. if it is clogged up then P.M. me because I have a couple of extra ones for sell if you need it.

 

R

Ready4this96

New Member

Dec 11, 2003

105

0

0

Clinton Twp., MI

Apr 3, 2004

#6

• Apr 3, 2004

• #6

What was your problem? Was the coolant tube not hooked up all the way or something??

Tyler