pi intake?

[stangpower97]

i was just wondering if i could put a pi intake on non pi car 96-98 mustang and what would all be involved with the swap or what other parts would i need to get and also what type of gain would i see thanks

 

[kboy262]

Yes you can. It actually is a great improvement over stock. Livernois Motorsports has the completed kit with adapter plates but is costly. A lot people use RTV sealant instead of adapter plates and been very successful. You will also need to tap for 2nd temp sensor on the intake and need a new PI tubing that goes in the valley of the motor. It is supposely an easy mod and give you around 20 rwhp.

 

[stangpower97]

thank for the info k boy do you have any idea on what a new pi intake cost or could i just get a used one?

 

[stangpower97]

and how do you like your cams and what was total cost of cams and install

 

[kboy262]

thank for the info k boy do you have any idea on what a new pi intake cost or could i just get a used one?

You can get a new one for around $200 give or take a couple of bucks. Or you can search the classifieds (ebay) for a used one. It will still work, but I recommend one from a 2002 or newer due to the fact that it has the aluminum coolant crossover.

 

[stangpower97]

thanks for your help

 

[2002BLGT]

www.livernoismotorsports.com

 

[NewStangNewbee]

http://www.livernoismotorsports.com/product.phtml?p=457 whay is this so expensive?

 

[danny g]

can you buy a bullit intake and use their adapter plates? how much are the adapter plates. I would just get the frpp one for my 96 but it is too damn expensive

 

[HIGDON]

The bullitt intake with plate wouldn't fit under the stock hood at all. Look on ebay for your PI intake. I picked mine up at the last minute for $56.00.