• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

~PICS~ Parts ready to be installed...

  • Thread starter Thread starter BuffMUSTANG
  • Start date Start date Nov 12, 2005
  • 1
  • 2
Next
1 of 2 Next Last
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#1
  • Nov 12, 2005
  • #1
Well I'm almost ready to start the makeover on my car. It's going to be a totally different car when i am done. I still need to purchase a clutch since i don't want to have to do a clutch anytime soon after i put the LT's on. So i have a friend that works at Ford and can get a 03 Cobra clutch kit for $500.00 including AL flywheel.... Is that my best choice? or would a King Cobra hold up any better? I'm also waiting on the other set of heads to be ported and polished. Then i want to swap the SHM 2730 cams for some VT stage 2 or the equal comp cams.

So on the list of things to do there is:

CC plates
Struts
Coil overs
K-member
A-Arms
Heads
Cams
LTs
H-pipe
Having a friend weld some 2.5" over axle tubes on to the Magnaflows
4.10's (friend is doing the rear)
31 spline T-loc
31 spline axles
weld torque boxes and axle tubes
Upper control arms
lower control arms
rear shocks
rear springs W/air bag
clutch


What else should i buy besides SFC's, AL drive shaft?

What else should i need or should i do since I'm going to be going through everything?

A couple of friends of mine and myself are going to do all of this over one weekend. Shouldn't be a problem. Any help or helpful comments are appreciated. now for the pics.

Also, when i put the LT's on i want start the car up and drive it around the block just to see how loud it would be. Is this a bad idea? Could it damage anything?









My garage (where all of the magic is going to happen!)



Thanks for looking.... Justin.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Nov 12, 2005
#2
  • Nov 12, 2005
  • #2

is it your daily driver???
you do know the tubular k-member isnt street legal at all right? if you wreck your car and the insurance company notices it, you're screwed. just a heads-up. nice mods though, its going to be sick what cams btw??
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Nov 12, 2005
#3
  • Nov 12, 2005
  • #3
thats funny how you laid everything out in order, its like adult toys.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Nov 12, 2005
#4
  • Nov 12, 2005
  • #4
u have a life...
 
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#5
  • Nov 12, 2005
  • #5
I did not know that about the K-member.... I pray i never get in an accident but if i do i will make sure that the insurance company doesnt see the k-member, hopefully. yes, this is my daily driver.

Gotta love the toys...
 
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#6
  • Nov 12, 2005
  • #6
urban96 said:
u have a life...
Click to expand...


The main reason i laid everything out was because i needed to clean upstairs in the garage where all of this stuff was just thrown around. I wanted to make sure i have everything so that when i start the build im not having to look for anything. Plus it's fun to see what i'm about to get myself into....
 
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#7
  • Nov 12, 2005
  • #7
right now i have SHM 2730 cams but i want to sell them and buy some VT stage 2's or some equal comp cams.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Nov 12, 2005
#8
  • Nov 12, 2005
  • #8
smart move

the k member isnt as stong as stock, so pray you dont get into a head on
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Nov 12, 2005
#9
  • Nov 12, 2005
  • #9
your going to love the power difference!
 
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#10
  • Nov 12, 2005
  • #10
Now i have to think about if the weight savings is worth it. This is my dd and i only go to the track maybe 10 times a year.
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Nov 12, 2005
#11
  • Nov 12, 2005
  • #11
God.. I wish I had a lift and compressed air in my garage.
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Nov 12, 2005
#12
  • Nov 12, 2005
  • #12
what do you mean? are you now considering not putting in the k member and coilovers?

i was planning to do a k member myself, not the coilovers though. mine is not a daily driver, but i dont think that makes a difference, accidents can happen any time. hopefully not to either of us.
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Nov 12, 2005
#13
  • Nov 12, 2005
  • #13
what are the insurance companies going to do, give you absloutely nothing, if you been paying them the whole time? that is crazy. i mean with all the money you give them they cant just tell you to f off, can they?

cant you just say you didnt know that the k member made the car illegal?
is it stated on the sites that sell them?
 
B

BuffMUSTANG

New Member
Sep 3, 2003
28
0
0
Nov 12, 2005
#14
  • Nov 12, 2005
  • #14
yea, the k-member and coilovers are still going in. Just thinking everything through.
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Nov 12, 2005
#15
  • Nov 12, 2005
  • #15
what kinda coilovers did you get? I'll buy 'em if you decide not to put them on seriously.
 
0

'03GTinFLA

Member
May 29, 2004
486
0
17
St. Petersburg, FL
Nov 12, 2005
#16
  • Nov 12, 2005
  • #16
When you said it was all going on in one weekend, I was like no F'n way. Then I took a look at your garage. Wow. I'm buying a house and the realtor is always like, what do you think. I always say, I don't care about the house, that's the gf's part. If the garage is big, I'm home.
 

98blackmagic

New Member
Jun 2, 2005
386
0
0
wouldnt you like to know
Nov 12, 2005
#17
  • Nov 12, 2005
  • #17
So what bank did you rob how much was all that stuff

You have a lot of parts I dont have............you suck

Just kidding, you da man
 

RedDaemon

10 Year Member
Mar 31, 2005
3,470
9
108
Atlanta, GA
Nov 12, 2005
#18
  • Nov 12, 2005
  • #18
nice setup! however...those are some nice dings in ur LT's...are u gunna have them fixed?
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Nov 12, 2005
#19
  • Nov 12, 2005
  • #19
Oh yea, in case nobody responded yet, it won't hurt anything to drive with just the headers on, but you'll feel a big loss of torque and probably will get a check engine light .. nothing to worry about.
 

Blinkstang

Member
Apr 2, 2005
316
0
16
Chicago, IL
Nov 12, 2005
#20
  • Nov 12, 2005
  • #20
Hey, nice setup. Noticed you have pretty much the same exact exhaust setup as me. I have BBK LT's, with an O/R H, and the Magnaflow catback. I think you will like the sound! Its very nice and quiet at idle and when normally driving, so when you first start it you may not be too happy, haha. But when you get on it, it really screams. I like the fact that its nice and quiet inside the car and then loud whenever you need it to be. I still set off car alarms and like the sound a lot better than when I had my Magnapack catback, it was way too loud in a tin metal raspy kinda way. I like it loud, real loud, but only if its nice and deep throughout the RPM range. This setup should be nice, good luck with everything!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Which SN95 axles for 93 LX, disc brakes, ABS rings?
  • dan50
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
416
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 3, 2026
7-UP BILL
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
542
SN95 V6 Mustang Tech Tuesday at 2:38 PM
joeybuddy96
J
D
Drivetrain Where to place jackstands when servicing rear diff
  • dqureshi06
  • Oct 16, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
430
Fox 5.0 Mustang Tech Nov 2, 2025
limp
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
121
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
new :poo: box, may need to hit you guys up for 79-82 info when i fix thIs turd.
  • rednotch
  • Sep 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
40
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?