• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Pictures of the Billet Specialties Installed

  • Thread starter Thread starter 1965-Mustang
  • Start date Start date May 24, 2006
1

1965-Mustang

New Member
Nov 25, 2003
85
0
0
May 24, 2006
#1
  • May 24, 2006
  • #1
I finally got them mounted on the car and took a couple pictures. I do have a problem with the rear passenger side wheel rubbing the wheel well. They are all 17"x8" and the tires are; rear: 255/40/17 - front: 235/45/17. They dont seem to rub on the rear driver side though. They do come close to one bottom edge of the wheel well on both sides but they dont hit and that edge I think can be "massaged" some. They clear the wheel wells when just sitting but I had them rub when the car was moving on that one side, and I think it was because of a bump. The passenger side also looks like it sits a lot lower. I believe it is the leaf springs are old and sagging. What do you guys think?

Here are the pictures (WARNING they are big):

(the red circle is where it rubs)
<a href="http://img524.imageshack.us/my.php?image=img02044vc.jpg" target="_blank"><img src="http://img524.imageshack.us/img524/4983/img02044vc.th.jpg" border="0" /></a>

<a href="http://img525.imageshack.us/my.php?image=img02066hp.jpg" target="_blank"><img src="http://img525.imageshack.us/img525/2005/img02066hp.th.jpg" border="0" /></a>

<a href="http://img385.imageshack.us/my.php?image=img02071ep.jpg" target="_blank"><img src="http://img385.imageshack.us/img385/3144/img02071ep.th.jpg" border="0" /></a>

<a href="http://img385.imageshack.us/my.php?image=img02098ui.jpg" target="_blank"><img src="http://img385.imageshack.us/img385/4936/img02098ui.th.jpg" border="0" /></a>
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
May 24, 2006
#2
  • May 24, 2006
  • #2
Lookin good! So did you get new (longer) wheel studs?

My wife wants a set of those for her '67
 
M

Mustang Boy

New Member
May 23, 2006
23
0
0
Tampa Florida
May 24, 2006
#3
  • May 24, 2006
  • #3
im surprised that they rub on bumps cause judging from the drivers side the rear end seems to have retty good clearence i would even go o far as to say u might want to lower the car a little
 

SoCalCruising

Founding Member
Jul 25, 2000
2,437
0
47
SoCal
May 25, 2006
#4
  • May 25, 2006
  • #4
If you lower it, the problems will multiply. That is, IMHO, too big of a tire for a 65-66 and will keep you from lowering the car much. I had 245/50-16s and had to ditch them for a 225 series tire in order stop the rubbing on my lowered car. Standard-eye 5-leafs might be ok if you don't use a lowering block.
 
6

66HertzClone

New Member
Aug 24, 2004
428
0
0
Central New Jersey
May 25, 2006
#5
  • May 25, 2006
  • #5
SoCalCruising said:
If you lower it, the problems will multiply. That is, IMHO, too big of a tire for a 65-66 and will keep you from lowering the car much. I had 245/50-16s and had to ditch them for a 225 series tire in order stop the rubbing on my lowered car. Standard-eye 5-leafs might be ok if you don't use a lowering block.
Click to expand...

I agree with the size issue, when I fitted my new wheels a few weeks ago the tire shop ordered 4 of the 225/50-16 and 2 245/50-16 in hopes that they would fit. Once the 245's were installed on the car it was very clear that short of rolling the entire lip or grinding it off they were going to rub, and rub badly. Needless to say I have 225 front and rear and no rubbing at all.

I have a set 138# 1" drop 4 leaf springs in the rear.
 
1

1965-Mustang

New Member
Nov 25, 2003
85
0
0
May 25, 2006
#6
  • May 25, 2006
  • #6
Hmm...According to Dodgestangs chart, which I used before I ordered them, they should fit with the 4.75 backspacing. I do realize though that the car is 40 years old and there are differences. They barely rub and only do when driving it over bumps. I don't have a problem with the outer lips...I don't need to roll them I'm sure. I ordered some Maeir Racing 4.5 leafs with new 'racing' shackles and KYB shocks from Mustang Depot. I appreciate your feedback though!

It only rubs on the passenger side. The drivers side is fine, and as Mustang Boy said, it does sit higher there and I think thats why it clears.

The fronts are fine and they are 235/45/17 on 4.75 backspacing.

Thanks 68keyblr. I love your car. Those wheels you got are so nice. And no I didn't end up needing new studs, I found the right style lug nuts and they are fine now.
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
May 26, 2006
#7
  • May 26, 2006
  • #7
1965-Mustang said:
Thanks 68keyblr. I love your car. Those wheels you got are so nice. And no I didn't end up needing new studs, I found the right style lug nuts and they are fine now.
Click to expand...

That's awfully kind of you to say I have really come to love the 65 hardtops with 17" wheels...when everything is just right they have such a clean and tight look to them. You car looks awesome!
 

mdjay

Premium Sponsor
Dec 9, 2003
896
0
16
Las Vegas, NV
May 26, 2006
#8
  • May 26, 2006
  • #8
Are you sure they're hitting on the outside and not the front of the inside wheel well???

If you're that close to the lips, you should be running a panhard bar as well.
 
1

1965-Mustang

New Member
Nov 25, 2003
85
0
0
May 26, 2006
#9
  • May 26, 2006
  • #9
They do hit on the inside, not the lips. The lips are fine. I'll add another picture of where it rubs. But that problem will be gone soon. I'll also take some more body pictures later today since it's sunny and nice outside.

 

Attachments

  • rubbing9uw.webp
    2.8 KB · Views: 145
You must log in or register to reply here.

Similar threads

Brake-hose-to-drum Fit Issue.
  • 70mstang
  • Mar 2, 2018
  • Classic Mustang Specific Tech
Replies
0
Views
1K
Classic Mustang Specific Tech Mar 2, 2018
70mstang
C
Engine why is this oil leak happening? (pic)
  • craig3x
  • Feb 2, 2013
  • Classic Mustang Specific Tech
Replies
6
Views
2K
Classic Mustang Specific Tech Feb 28, 2013
SHEDRED
  • Locked
What Is My '86 T-top Hatchback Rolling Chassis W/ Cobra Irs Worth?
  • crazy98gt
  • Jun 14, 2015
  • Fox Body Mustangs For Sale (1979-93)
Replies
2
Views
3K
Fox Body Mustangs For Sale (1979-93) Jul 29, 2015
Noobz347
  • Locked
Expired Stock 75 amp alternator
  • mikestang63
  • Nov 17, 2012
  • Engine and Power Adder
Replies
0
Views
903
Engine and Power Adder Nov 17, 2012
mikestang63
C
New Guy Needs Help
  • CFerreirax24
  • Jul 28, 2012
  • SN95 4.6L Mustang Tech
Replies
12
Views
1K
SN95 4.6L Mustang Tech Jul 29, 2012
slayerripkdc
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?