Planning Closet reunion - Early Fall, near Cape Cod
- Thread starter chepsk8
- Start date
You could ship her to me......(your Mustang, NOT your sister, unless of course she's HOT!Realmongo said:
)If you really, really, REALLY wanted to, you'd find a way!t_chelle16 said:
OK, the 7th it is.
PAk has unoficially confirmed, he promised to post here.
'Chelle - C'mon!!!!!!! A weekend trip! This is your only chance to meet some real celebrities!
Worth - Can you host? Or suggest a place?
BBFCM - Check the Ferry Schedules.
RealMongo - Leave sooner!
Anybody else?
PAk has unoficially confirmed, he promised to post here.
'Chelle - C'mon!!!!!!! A weekend trip! This is your only chance to meet some real celebrities!
Worth - Can you host? Or suggest a place?
BBFCM - Check the Ferry Schedules.
RealMongo - Leave sooner!
Anybody else?
Pakrat
Founding Member
Hey nice that you finally did your own dirty work Dan and contacted me. Since you hadn't returned my calls I was starting to think you were ignoring me. Faberware or not I was the only one there last time and I will surely be there this time too. You sure you gonna be able to make the trip though? There are alot more than 10 turns to navigate from there to here, lots of pretty colors and distractions to. Maybe someone more mature like Deanna should drive? 
Note to self: For every faberware joke made Dan gets zinged with 3 in front of the whole FFR staff!
Note to self: For every faberware joke made Dan gets zinged with 3 in front of the whole FFR staff!
Pakrat said:Hey nice that you finally did your own dirty work Dan and contacted me. Since you hadn't returned my calls I was starting to think you were ignoring me. Faberware or not I was the only one there last time and I will surely be there this time too. You sure you gonna be able to make the trip though? There are alot more than 10 turns to navigate from there to here, lots of pretty colors and distractions to. Maybe someone more mature like Deanna should drive?
Note to self: For every faberware joke made Dan gets zinged with 3 in front of the whole FFR staff!
Gad, one phone call & I'm crucified! I can reply with such retorts as:
"At least I wrecked on a racetrack"
"Mine is damaged less than yours"
and so forth, but we'll leave that up to the others.
This makes five so far. MY guess is to meet at Factory Five around 10:30 in the Morning. I'll get my parts, we'll all check the stuff out, then out to Worth's for Lunch & Fun.
65stanger said:You could ship her to me......(your Mustang, NOT your sister, unless of course she's HOT!
She's divorced. Maybe I should fix her up with either you or Dan.
Ex-c-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-u-se me! But you were decidedly ABSENT for the FIRST trip!Pakrat said:Hey nice that you finally did your own dirty work Dan and contacted me. Since you hadn't returned my calls I was starting to think you were ignoring me. Faberware or not I was the only one there last time and I will surely be there this time too. You sure you gonna be able to make the trip though? There are alot more than 10 turns to navigate from there to here, lots of pretty colors and distractions to. Maybe someone more mature like Deanna should drive?
Note to self: For every faberware joke made Dan gets zinged with 3 in front of the whole FFR staff!
I know, 'cause I WAS there!
I think you're right tho', we'll let Deanna drive from the ferry! Otherwise if we don't it'll be........turn 1.....turn 2.....turn 3.....turn 4.....turn 5.....turn 6.....turn 7.....turn 8.....turn **CRASH!** 9.....turn 1.....turn 2.....turn 3.....turn 4.....turn 5.....turn 6.....turn 7.....turn 8.....turn **CRASH!** 9.....turn 1.....turn 2.....turn 3.....turn 4.....turn 5.....turn 6.....turn 7.....turn 8.....turn **CRASH!** 9..... etc., etc.....All the way to FFR!
Pakrat
Founding Member
You're right Fritz, a shattered knee cap should have been no excuse to miss that first one, So it was in 5 pieces, big deal, I could have toughed it out and found a way to work the gas and brake pedals with my left foot if I was truly dedicated.
Oh and Dan even though it was on the track and it is less wrecked than mine let's not forget that A) I'm not the one who wrecked my own car though and B) that I'm also smart enough to be properly insured so my rebuild not only isn't costing me a dime but I'm getting extra out of it to boot.:Zip2:
So it was in 5 pieces, big deal, I could have toughed it out and found a way to work the gas and brake pedals with my left foot if I was truly dedicated. Oh and Dan even though it was on the track and it is less wrecked than mine let's not forget that A) I'm not the one who wrecked my own car though and B) that I'm also smart enough to be properly insured so my rebuild not only isn't costing me a dime but I'm getting extra out of it to boot.:Zip2:
Pakrat said:You're right Fritz, a shattered knee cap should have been no excuse to miss that first one,
Oh and Dan even though it was on the track and it is less wrecked than mine let's not forget that A) I'm not the one who wrecked my own car though and B) that I'm also smart enough to be properly insured so my rebuild not only isn't costing me a dime but I'm getting extra out of it to boot.:Zip2:
A "Zesty" Response! Me thinks the verbal brick-bats will be flying on the 7th!
Talked with WORTH, we can lunch at his place after FFR.
To heck with them, think how much fun WE would have watching Pak slice and dice Hops with his rapier sharp wit!chepsk8 said:
btw - WORTH,
Love the parts you gave me, they all bolt on beautifully and look great. However, I discovered today that the spindles are actually off of a '67. I discovered this when I went to install my rotors. The '64 - '66 spindles are essentially the same as the '67 - '68s with one teeny weeny minor little exception. The earlier spindles use a 5/8" spindle nut, whereas the latter use a 3/4" and no matter how hard I tried, I just couldn't get the 5/8" hardware to fit!
65stanger said:btw - WORTH,
Love the parts you gave me, they all bolt on beautifully and look great. However, I discovered today that the spindles are actually off of a '67. I discovered this when I went to install my rotors. The '64 - '66 spindles are essentially the same as the '67 - '68s with one teeny weeny minor little exception. The earlier spindles use a 5/8" spindle nut, whereas the latter use a 3/4" and no matter how hard I tried, I just couldn't get the 5/8" hardware to fit!
Did you use the correct orange left-handed metric adjustable wrench with the no-slip grip?
Pakrat
Founding Member
WORTH
20+ Year Stangneter 
Damn, Pak's coming too, I better put my cars in the back yard so Crash and Crash don't hit them
Maybe I should install guardrails in my driveway
Maybe I should install guardrails in my driveway