play in distributor shaft

nickmav70

New Member

Jan 27, 2010

24

0

0

Savannah Ga

Nov 18, 2011

#1

• Nov 18, 2011

• #1

im having some wierd timing issues with my efi 5.0... my questions is could i have timing issues from play in the distibutor shaft? how much should it have? should i be able to move the shaft up and down with it installed into the engine? how do i measure the thrust on it and what are the specs?

if anyone can answer any of these questions it would be great


thanks

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Nov 19, 2011

#2

• Nov 19, 2011

• #2

Whats the distance from the flange (where it sits on the block) and the top of the gear? You can make shims to take care of the slop if needed...

 

rd

Founding Member

Jan 12, 2000

3,316

63

109

Ocean Springs MS

Nov 22, 2011

#3

• Nov 22, 2011

• #3

There is a spec for up-down movement of the shaft in the body, and then you can shim the dist in the engine some. Note the gear orientation tends to pull the dist gear down, iirc.

Dont have the numbers handy. I would not think this to be a common problem though.

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

Nov 22, 2011

#4

• Nov 22, 2011

• #4

end play is .024" - .035"

 

Attachments

• Distributor Gear Change.pdf

  40.5 KB · Views: 328