• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Possible 86gt vert purchase, what to check for?

  • Thread starter Thread starter HISS GT
  • Start date Start date Mar 24, 2007
H

HISS GT

Founding Member
Aug 8, 2001
104
0
0
Norfolk, VA
Mar 24, 2007
#1
  • Mar 24, 2007
  • #1
I'll be looking at a 86gt vert manual in the next few days but I have no idea what to check for as far as the top is concerned. I've had an 86gt hatch (auto), 97gt coupe (manual) and now a 05 V-6 manual (which feels as strong if not stronger than the other two). BTW, it's listed as stock w/162k miles. I'll take pics and get more info whenever I see the car and post them. Thanks in advance for any help.
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Mar 24, 2007
#2
  • Mar 24, 2007
  • #2
we used to have a checklist on here but i dont know where it is. Crawl under the car and look for rust and rot on the floor panels and especially where the floor is welded to the body itself..
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Mar 24, 2007
#3
  • Mar 24, 2007
  • #3
check the bottom of the doors, lip of the trunk lid the rear 1/4's, floor boards ect...just give the car a good once over..
 

RsStanG1987

I shaved all my pubes playing this game.
10 Year Member
Mar 13, 2004
569
9
79
Dupont PA
Mar 24, 2007
#4
  • Mar 24, 2007
  • #4
torque boxes also check thoose. Check for tranny leaks, tears in roof, oil leaks.. Take it on a good long test drive and make sure you beat the piss out of it..
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Mar 24, 2007
#5
  • Mar 24, 2007
  • #5
check for VIN tags and evidence of prior body repairs. Not necessarily a reason to pass on the car, but it could help you negotiate a lower price!
 
H

HISS GT

Founding Member
Aug 8, 2001
104
0
0
Norfolk, VA
Mar 24, 2007
#6
  • Mar 24, 2007
  • #6
Thanks everyone for the help but

I learned alot but I was mainly concerned with the top not having any vert experience. I don't know about checking the latches, seals, motors, etc. Please keep the info coming.
 

Deece

Member
Sep 16, 2005
47
0
7
Mar 24, 2007
#7
  • Mar 24, 2007
  • #7
run the top up and down a few times look to see if it binds at all or is smooth. The seals will look worn if they are. If you can get your hand on the pump. Its behind the rear seat between the top of the rear shocks. you should be able to get to it from the back pretty easily. Check for hydraulic fluid around the pump and along the lines. My last two verts leaked at the pump. Not a real big deal but it might have made a mess under your rear seat and carpet.
 
B

bcmbcmbcm

20+ Year Stangneter
Jan 29, 2003
455
0
16
Mar 24, 2007
#8
  • Mar 24, 2007
  • #8
RUN IT THROUGH A CARWASH!

HISS GT said:
I learned alot but I was mainly concerned with the top not having any vert experience. I don't know about checking the latches, seals, motors, etc. Please keep the info coming.
Click to expand...


No joke, put some high pressure water on it!

The seals on the rear quarter windows, 'vertical weatherstrip' I think they are called crack and deform easily and leak on the panels to the side of the rear seat. Mine are so deformed that there is about a 1/8 gap now between the drivers side front window and this seal

I have the seals, but I have no idea how to change it!

With the top down and the windows up, open and close the doors several times. Do the windows fit nicely inside the little grooves in the rubber on the top or does it catch/pinch it?

There is some adjustment in the windows inside the doors to get it to do this properly but imho this is a little tricky and I would advise you to make sure it seals right the before you buy it.

How about the seals on the A-Pillars? Mine are old and kind of cracky but they still seal well.

A good upholstery guy told me that these seals are long-life parts and will seal well despite being kind of cracky but the biggest problems that are HARD to lick have to do with the adjustment of them.

Oh,

almost forgot, pull up the trunk carpeting and look for leak evidence, smell for mildew as
a failing top will let water into the trunk. A warped cardboard spare tire cover, especially with water stains will help alert you to this.
 
You must log in or register to reply here.

Similar threads

J
89 2.3 LX running rich, hesitation on acceleration, high and hanging idle Help!
  • jpstucky
  • Jun 13, 2023
  • 2.3L (N/A & Turbo) Tech
Replies
4
Views
3K
2.3L (N/A & Turbo) Tech Jun 15, 2023
jpstucky
J
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
New to me Fox body. Looking for Rough HP and compression ratio
  • Halford4491
  • Oct 30, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 3, 2021
General karthief
Engine New to Mustangs, guidance needed on fault codes 47 & 45
  • sUdz6.0pwrstk
  • Sep 30, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
36
Views
4K
Fox 5.0 Mustang Tech Oct 23, 2021
General karthief
Swapping a 3.7L v6 into my 1966 Mustang, looking for a bit of ECU info
  • wicked93gs
  • Nov 17, 2019
  • 2005 - 2014 Specific V6 Tech
Replies
14
Views
11K
2005 - 2014 Specific V6 Tech Feb 16, 2022
wicked93gs
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?