Post them pics!!!!!!

JDS68Stang · Dec 6, 2007

bnickel said:
yes static, the bodyshop's i worked in both used a piece of heavy chain over the exhaust and touching the floor but i guess a piece of wire and some lug nuts would do the same thing. think of it like your powder coating the entire car, the paint molecules will gain a positive charge when they leave the tip of the gun, if you ground the car then they will be attracted to it. it doesn't work quite the same way as powder coating obviously but the effect is similar plus if you get a bunch of overspray hanging in the air or a solvent cloud as it is sometimes called you reduce the chances of becoming a human BBQ.

I understand just what your saying about the static, just never knew this before and it'll be helpfull now in the future.
As for the solvent cloud, I never thought about a static spark igniting that,
I think thats good info for anyone reading this that didn't know that, kinda scarey when you think about that possibility. When I do get a good cloud building I stop shooting till it clears, thats usually why I paint in sections. Thanks for the tips.

joedokes28 · Dec 10, 2007

1966 289 4spd
17x8 AR CL205's with 235/45 Rubber
Nearly stock everything else

kenosobby · Dec 11, 2007

Joe, now that one looks good..not too flashy, nice stance, and deff clean... nailed a good look on that one

Markus · Jan 13, 2008

Hello guys, very, very nice cars on this thread

Here are "some" pictures of my baby:

More pic´s on my web page: www.mustang67.com

Markus :SNSign:

electricgreen · Jan 13, 2008

electricgreen said:
Everyone's cars look so....done...

Here's Eleanor:

Before:

During:

No after yet, lol....Many more pics on her cardomain page: http://www.cardomain.com/ride/796631 Needs update to include new outer wheelhouse welded in, and quarter skin final fitup done-should be glued/welded in this weekend.

Updated pic:

Not finished yet, but getting there.

Benoit23 · Jan 14, 2008

electricgreen said:
Updated pic:

Not finished yet, but getting there.

Lookin good. Who fixed the bashed in rear body panel? How was it fix & How much did it cost you?

Thanks, Chris

Gailahan · Jan 14, 2008

Markus said:
Hello guys, very, very nice cars on this thread

Here are "some" pictures of my baby:

More pic´s on my web page: www.mustang67.com

Markus :SNSign:

Those pictures are too artsy and there are no pictures of the car as a whole, at least posted on this forum...

Markus · Jan 14, 2008

here is the complete car.....

electricgreen · Jan 14, 2008

Phat-Stang said:
Lookin good. Who fixed the bashed in rear body panel? How was it fix & How much did it cost you?

Thanks, Chris

Thanks. Someone we know that welds for a living did it. It was part of a "package deal" that included floor pans, patching three torque boxes, the trunk pan and tail light panel. About 4k. The middle pic in the three I quoted is part of the fix. He took the whole thing including the wheelhouse (inner & outter) out. We had bought a take off from another car that included all of it, he pieced together the structural pieces from the two.

68stang351 · Jan 15, 2008

I might as well post some better pics of mine, all I put on here before was a cell phone pic.
Here goes

Sorry if I posted too many.

73vertstang · Jan 20, 2008

Body and paint finished

Here's a couple of my 73, this is only the first coat, two more to go after the engine and trans are put back in.

67topless · Jan 21, 2008

67 Drop top

You can click on the pics for the full size effect!

The stance is still off... I need to drop the front about another 3/4 of an inch.

Here is the 289 - she has seen better days; but that is a story for another day:

My gallery -- http://1967stang.com/Gallery/ -- (which needs a lot of work - just like my car). It's amazing how things get put on hold when babies start showing up.

Z06killinSBF · Jan 22, 2008

68stang351 said:
I might as well post some better pics of mine, all I put on here before was a cell phone pic.
Here goes

Sorry if I posted too many.

How well did the 5.0 console fit?

68stang351 · Jan 24, 2008

Z06killinSBF said:
How well did the 5.0 console fit?

It actually fit prety good except that I had to trim a lot of the top to get it to contour to the bottom of the dash. I'm not quite done with it yet, I need to make a plate or cover to go right under the radio bezel, and I need to heat up the top side pieces so I can bend them in and have it clear the glove box door and ash tray.

I'm debating wether or not I should convert parking brake to the fox parking brake.

I may do this with another console and see if it comes out any nicer seeing as I have a few laying around.

Z06killinSBF · Jan 25, 2008

68stang351 said:
It actually fit prety good except that I had to trim a lot of the top to get it to contour to the bottom of the dash. I'm not quite done with it yet, I need to make a plate or cover to go right under the radio bezel, and I need to heat up the top side pieces so I can bend them in and have it clear the glove box door and ash tray.

I'm debating wether or not I should convert parking brake to the fox parking brake.

I may do this with another console and see if it comes out any nicer seeing as I have a few laying around.

Cool, I've been thinking about doing this in mine for a while now. First I've seen it done. I might run a 4th gen Firebird console for the cup holders though.

mattj25 · Jan 25, 2008

nice cars!

getyup68 · Jan 25, 2008

68 Coupe

getyup68 · Jan 25, 2008

68 Coupe

mustang6tee8 · Jan 31, 2008

Markus said:
Hello guys, very, very nice cars on this thread

Here are "some" pictures of my baby:

More pic´s on my web page: www.mustang67.com

Markus :SNSign:

Gulfstream Aqua ist sehr schon im Sonnelicht!!

67topless · Feb 1, 2008

mattj25 said:
Hey yall check out the my site sometime. I'm new on here so I'm trying to figure everything out.

http://www.cardomain.com/ride/2608616

Big time congrats on getting in MM.

Scott

Post them pics!!!!!!

New Member

Member

New Member

Member

New Member

Attachments

Member

Member

Attachments

New Member

Attachments

Member

Attachments

Member

Attachments

Member

New Member

Attachments

New Member

New Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency