Post them pics!!!!!!

68stang351 · Feb 11, 2007

BADBOSS said:
BOSS 302 .030 over solid roller cam and lifters by Crower
750 holleyDP
HI-PO 289 dizzy w/pertronix
11inch Centerforce w/40lb flywheel
3.91 rear
oil cooler
front cover Mustang Monthly and featured May 1983 and 1985

Haha, Shamu is jumping out of your back window!!

krash kendall · Feb 11, 2007

I thought they only put whale tails on Porches!

Penguin · Feb 11, 2007

Here's my '66 6-cylinder.

Just finished rebuilding the front suspension and steering. It was down for about 3 months. Also just got new taillights, parking lights, and reverse lights.

It doesn't have the horse in the grille anymore, because someone ripped it out last week. Now I need a new horse and grille. Yeah. It used to be my daily driver but I haven't driven it since then. Makes me sick.

BIG-MAC · Feb 12, 2007

Heres mine...

bnickel · Feb 12, 2007

Kevin, who made your shock spacers? i'd like a set of thoseor two of those for my cars.

BIG-MAC · Feb 12, 2007

bnickel said:
Kevin, who made your shock spacers? i'd like a set of thoseor two of those for my cars.

I made them out of 3/4" aluminum plate...first I traced the outline of the bracket then removed as much material as I could using a band saw and vertical end mill. Then I ground the outside smooth using a belt sander. The right shock eye barely hits the bottom of the hood at this height and I still do not have very much shock travel. I am eventually going to replace my Konis with some they make specially for lowered cars, then I can remove the spacers.

DJE55 · Feb 13, 2007

I have always wanted to ask you about the PHR photo shoot. Did your tires rub at all during the cornering shots? That left front tire in that cornering shot looks like it's laying on the fender. BTW car looks great.

George'65 · Feb 14, 2007

.
Hi,

Would SPICER or persons who know please tell me where I could get a pair of those GOOD LOOKING tail light brakets ?

I understand that the design also matched the fuel filler cap ( which is not shown here )

Thanks,

George'65

BIG-MAC · Feb 14, 2007

DJE55 said:
I have always wanted to ask you about the PHR photo shoot. Did your tires rub at all during the cornering shots? That left front tire in that cornering shot looks like it's laying on the fender. BTW car looks great.

It was laying on the fender...Hunkins wanted me to run tight circles as fast as I could without spinning out so I am at almost full lock. I am raising it up one inch in the back and a half inch in the front...hopefully that will be enough.

How is your wheel decision going?

geostang351 · Feb 14, 2007

George'65 said:
.
Hi,

Would SPICER or persons who know please tell me where I could get a pair of those GOOD LOOKING tail light brakets ?

I understand that the design also matched the fuel filler cap ( which is not shown here )

Thanks,

George'65

Some to chose from at Mustangs Plus. Use their search and type billet bezels:

http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MPFMP&Product_Code=11540
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MPFMP&Product_Code=11249
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MPFMP&Product_Code=11248

DJE55 · Feb 14, 2007

BIG-MAC said:
It was laying on the fender...Hunkins wanted me to run tight circles as fast as I could without spinning out so I am at almost full lock. I am raising it up one inch in the back and a half inch in the front...hopefully that will be enough.

How is your wheel decision going?

How is my wheel decision?????? I'm pulling the trigger this week for sure. I have narrowed it down but, who know. I had decided against the dark center but, I saw a set of DPE GT7's with dark centers and I loved them. Check out my wheel thread on here and let me know what you think.

Did the wheel do any damage to the fender on your car? I hope not, your car looks beautiful and I know that would be a huge bummer.

Mr67Stang · Feb 14, 2007

not much but it's mine

BIG-MAC · Feb 14, 2007

DJE55 said:
How is my wheel decision?????? I'm pulling the trigger this week for sure. I have narrowed it down but, who know. I had decided against the dark center but, I saw a set of DPE GT7's with dark centers and I loved them. Check out my wheel thread on here and let me know what you think.

Did the wheel do any damage to the fender on your car? I hope not, your car looks beautiful and I know that would be a huge bummer.

Nope no damage. These?

triostang · Feb 14, 2007

ohhhh i like those wheels

DJE55 · Feb 14, 2007

BIG-MAC said:
Nope no damage. These?

Those are the GT10's. The wheel I'm considering is a GT7. Take a look at my "pick my wheel" thread.

toolwench · Feb 16, 2007

Here's me and my two '68s:

There's still plenty to be done on both...

Fastback engine compartment. I've had this car since 1993 and I'm always changing/fixing/upgrading something.

And my convertible...

bdepedro · Feb 19, 2007

Great looking '68s. When I got my '70 fastback I was actually looking for a '68. Great styling. Love to see you ladies driving and especially working on your stangs!!!

Yellow66 · Feb 21, 2007

My 66 coupe and 65 fastback

Here is my 66 "A" code coupe

Yellow66 · Feb 21, 2007

My 65 fastback

And here is my 65 "A" code fastback. It is a project and will be stripped back and repainted.

80deathtrap · Feb 22, 2007

Bought this on Sunday for $3500. The damage you see is all it has except for a little bit of rust through around the gas tank in the trunk. And besides a repaint and a some bolt on engine work it is all original.

Post them pics!!!!!!

Attachments

Active Member

Active Member

Attachments

New Member

Attachments

New Member

New Member

New Member

Attachments

New Member

Member

New Member

Active Member

Attachments

New Member

Attachments

New Member

New Member

Attachments

New Member

Member

New Member

New Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency