Well I got my power pipe on so it was time to install it and my 80mm pro-m. So here goes the whole deal. No matter what order you put this damn thing together you wind up with no room to put the rest of it together. Hell the only easy way to do this would be to take my whole front bumper (which I am not doing!). :damnit: So I used the hose connectors to skip the pipe and just have the mass air meter and filter connected str8 to the TB. The hose connectors just hate my stock TB and are to big to fit my tiny TB. So new development is wait till I get a new TB and change everything at once, or go in the back yard drench whole thing with gas and torch it all. Very unhappy it seems the more I do the more parts have to be bought to make everything fit.