• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Power Steering pump identification problem 65

  • Thread starter Thread starter hunterhicks
  • Start date Start date Nov 20, 2008
H

hunterhicks

Member
Dec 4, 2003
62
0
7
D/FW
Nov 20, 2008
#1
  • Nov 20, 2008
  • #1
howdy all- I have a (rare?) p/s pump I think- it's for an early 65 with A/C. It has the "large neck." You see them for sale in the parts books for $275+, with no core needed. But they never have rebuilt ones...
So I thought I found one at NPD.

On my car, the return hose inlet points DOWN. (this is the key)

I have bought replacement pumps from mustang+ and now NPD, and they state it is the correct pump. I still have yet to receive a correct pump. Either I get a 'small neck' version, or this time I got one that looked almost perfect, but the return hose inlet points UP, and therefore is 'incorrect' for mustangs. I only say incorrect because you can buy the 'housing only' from many places, and they always state, "Correct for mustang" and have a downward pointing return inlet.

Here's a picture of what I have in my car now, and what the magazine (NPD in this case) refers to as "mustang correct"



Here's what I got in the mail-


Can anyone tell me what car the upward pointing pump is for so I can have the right info for the NPD folks?

Anyone know of someone that rebuilds these pumps? (D/FW area would be nice..)

Anyone else even have this pump?
 

enferno

Member
Jun 20, 2006
418
2
16
Nov 20, 2008
#2
  • Nov 20, 2008
  • #2
all of the pumps i've installed that i can remember have upward pointing return lines.

both of my '66 coupes have it, as well as the handful i've done at the shop
 
G

gjz30075

Member
Aug 30, 2004
250
0
17
Roswell, Ga
Nov 20, 2008
#3
  • Nov 20, 2008
  • #3
A lot of good info on this site:
http://www.stangerssite.com/steeringsysteminfo.html

He's probably a good bit of a drive from you though.

My pump has the nipple pointing down. Makes hooking up the hose much easier. I don't know what car has the nipple pointing up, like what you have.
 

stanger53

New Member
Jun 24, 2005
89
0
0
San Antonio, Texas
Nov 20, 2008
#4
  • Nov 20, 2008
  • #4
The large diameter filler neck pumps are correct for 1965-1966 Fords. On V8 cars, the straight up neck is for non-AC cars, the tilted neck for AC cars. In 1967, Ford went to the small neck pumps.

It is very common to get a later model small neck pump as a replacement, but it is not correct.

On a Mustang, the return hose nipple points down and outwards, towards the lower frame rail on the car. The pump you have where the nipple points upwards, toward the top of the fender apron, is designed for a Galaxie or Fairlane.

If you use a pump with the upward turned nipple on a Mustang, the stock style replacement return hoses are not long enough to go up and down onto the nipple without kinking.

About half the pumps I get in for rebuilding have the wrong housing on them, so I "re-clock" the return hose nipple so it points correctly.
 
H

hunterhicks

Member
Dec 4, 2003
62
0
7
D/FW
Nov 20, 2008
#5
  • Nov 20, 2008
  • #5
Hell ya! Thanks Stanger for knowing what I'm talking about. PM sent. Business to be done soon!
 
H

hunterhicks

Member
Dec 4, 2003
62
0
7
D/FW
Nov 21, 2008
#6
  • Nov 21, 2008
  • #6
This site that gjz referenced is amazing- there is a TON on P/S information on it. More than any mortal human being could ever wrap their head around. Good stuff.

gjz30075 said:
A lot of good info on this site:
http://www.stangerssite.com/steeringsysteminfo.html
.
Click to expand...
 
You must log in or register to reply here.

Similar threads

S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
114
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
R
electrical plug identification
  • redlineracing1328
  • Jun 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
111
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 12, 2026
keel
S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
86
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
203
1996 - 2004 SN95 Mustang -General/Talk- Today at 2:52 PM
JohnKay
J
G
79 steering rack problems
  • garyrc
  • Mar 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
138
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 8, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?