• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Power Steering Pump Toast!

  • Thread starter Thread starter raleighstang65
  • Start date Start date Jun 27, 2008

raleighstang65

Member
Jan 19, 2007
170
0
16
Wake Forest, NC
Jun 27, 2008
#1
  • Jun 27, 2008
  • #1
On my way home from work today my power steering pump locked up and busted the pulley right off the pump. Luckily I was only a few blocks from home when it happened. Somehow the power steering belt was just laying there under the radiator when I pulled in the driveway! So anyways, if I want to drive without the power steering hooked up until I can get a new pump will I need to do anything for this to work without messing up my new tie rods and suspension parts? Can I just drive as is without removing or changing out any parts?
 

woodsnake

15 Year Member
Jan 16, 2007
1,352
15
69
Hicksville, NY
Jun 28, 2008
#2
  • Jun 28, 2008
  • #2
Driving it without the power steering won't hurt anything besides ' the guns'.......
 

raleighstang65

Member
Jan 19, 2007
170
0
16
Wake Forest, NC
Jun 28, 2008
#3
  • Jun 28, 2008
  • #3
Then welcome to the gun show! Any ideas why the pump locked up? Had plenty of fluid and belt tension was normal. So I can just leave the hoses and everything hooked up minus pulley and belt...
 
0

01ragtop

Member
May 20, 2004
88
0
7
San Diego
Jun 28, 2008
#4
  • Jun 28, 2008
  • #4
When I bought my car the PO said the power steering pump had not been hooked up for the 3 years or so he owned the car. I drove the car for 6mos before finally buying a pump and hooking it up. When I did it worked fine. At speed it isn't even that bad, but parking lots and parallel parking will give you a workout.
 
0

01ragtop

Member
May 20, 2004
88
0
7
San Diego
Jun 28, 2008
#5
  • Jun 28, 2008
  • #5
raleighstang65 said:
Then welcome to the gun show! Any ideas why the pump locked up? Had plenty of fluid and belt tension was normal. So I can just leave the hoses and everything hooked up minus pulley and belt...
Click to expand...

I've had mine both ways. I think I prefer leaving the pump in minus the pulley and belts with the hoses hooked up. Seems like there would be less chance of dirt getting into the system that way, but like I said, the PO didn't have it hooked up for 3 years and all I did was install a pump and go.
 
C

C0V3R

Member
Feb 14, 2003
524
0
16
Australia
Jun 29, 2008
#6
  • Jun 29, 2008
  • #6
I just put in a KRC setup, replacing my old leaking one. So much nicer and more assist at low RPM
 
You must log in or register to reply here.

Similar threads

S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
88
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
Power steering hoses
  • Teen'93stang5.0
  • Apr 3, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
3
Views
195
1974 - 1978 Mustang II Talk & Tech Apr 14, 2026
Teen'93stang5.0
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
301
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
178
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 1:32 AM
bjornsn95
B
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
97
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?