Pretty sure i have a PI intake...

Tally_4.6 · Nov 28, 2006

Just as the title says, but i think i got some confirmation from this and i would like it from you guys as well. Its a stock '96 non PI intake, after that is what i have.

The '96.

View attachment 421017

Mine

View attachment 421019

View attachment 421021

View attachment 421023

View attachment 421025

View attachment 421027

Kurgan · Nov 28, 2006

Are you using the fact that it's got an aluminum crossover tube as your clue? I think the non-PI intake manifolds, in some varieties (probably a revision made to prevent cracking), come with aluminum crossovers.

The REAL way to tell if it's a PI or non-PI, in my opinion, is to remove the lower intake manifold and look at the shape of the ports. If they are teardrop shaped, then it's a non-PI manifold. If it's more diamond-rectangular shaped, then it's a PI intake manifold.

96BlueStangGT · Nov 28, 2006

Your's is NPI with aluminum crossover. I'm 100% sure.

DropTopPony · Nov 28, 2006

its npi....the first intake runner after the coolant crossover goes to the passenger side on NPI and to the drivers side on PI.

COramprat · Nov 28, 2006

It also doesn't look like it had to be tapped for the second coolent sensor. Looks like it came with it already. It's NPI...

Tally_4.6 · Nov 28, 2006

Damnit, thanks fellas. So why does mine have the aluminum crossover?

COramprat · Nov 28, 2006

Tally_4.6 said:
Damnit, thanks fellas. So why does mine have the aluminum crossover?

It was probably cracked at one time and replaced. The newer NPI intakes had the upgraded crossover.

jon595 · Nov 29, 2006

COramprat said:
It also doesn't look like it had to be tapped for the second coolent sensor. Looks like it came with it already. It's NPI...

Explorer PI intakes are like this!

Dusstbuster · Nov 29, 2006

Look at how deep it sits in the cylinder valley. If the heater hose runs directly underneath the manifold or the manifold leaves plenty of room between the bottom of it and the top of the cylinder valley, its a NPI. If it's a tight fit and the coolant tube runs along the side, it's a PI. My guess is that it's an NPI with Aluminum crossover.

TGJ · Nov 29, 2006

I forget, but I have mentioned it before, all plastic PI( Mustang, Crown Vic, Explorer, etc ) intakes first runner goes to one side, the NPI's first runner goes to the other side. Which side they go to, I don't recall, and Stangnet's search function is not that great to help me out and find my old posts on that. That all said, that is the easiest way to tell. That and how deep the intake sits in the valley. If there is an obvious space, NPI, hardly any space PI. Looking at the pictures of the valley, I would say NPI.

Mike97gt · Nov 29, 2006

NPI intakes that cracked were replaced with aluminum crossover versions of the NPI intake, both are still availible through ford..

Your car probally has a ford replacement parts aluminum crossover NPI intake.

Just for your information the 99-01.5 mustang gt came with a plastic crossover PI intake.

GDawg · Nov 29, 2006

DropTopPony said:
its npi....the first intake runner after the coolant crossover goes to the passenger side on NPI and to the drivers side on PI.

I still have my replacement NPI w/aluminum runner.

Tally_4.6 · Nov 29, 2006

svttech76 said:
NPI intakes that cracked were replaced with aluminum crossover versions of the NPI intake, both are still availible through ford..

Your car probally has a ford replacement parts aluminum crossover NPI intake.

Just for your information the 99-01.5 mustang gt came with a plastic crossover PI intake.

Those bastards at ford haha, and i knew about the '99-'01.5 crossover. Thanks.

Mike97gt · Nov 29, 2006

Tally_4.6 said:
Those bastards at ford haha, and i knew about the '99-'01.5 crossover. Thanks.

Yeah it would be nice if they gave out PI intakes, but ford just cares about fixing the car not modding it.

BTW I think you should change the colors of the writing in your sig, you can't read it with the basic forum skin.

Mike97gt · Nov 29, 2006

Tally_4.6 said:
Those bastards at ford haha, and i knew about the '99-'01.5 crossover. Thanks.

Yeah it would be nice if they gave out PI intakes, but ford just cares about fixing the car not modding it.

BTW I think you should change the colors of the writing in your sig, you can't read it with the basic forum skin.

Tally_4.6 · Nov 29, 2006

svttech76 said:
BTW I think you should change the colors of the writing in your sig, you can't read it with the basic forum skin.

Well i just changed my skin, so i can read it now. Are there gonna be other skins with this new setup?

Pretty sure i have a PI intake...

Tally_4.6

Member

Kurgan

96BlueStangGT

Member

DropTopPony

Noob Slayer

COramprat

...I can take it. I think.

Tally_4.6

Member

COramprat

...I can take it. I think.

jon595

New Member

Dusstbuster

I love meat more than anything! I just have a spec

TGJ

New Member

Mike97gt

it doe snot

GDawg

Tally_4.6

Member

Mike97gt

it doe snot

Mike97gt

it doe snot

Tally_4.6

Member

Similar threads

Pretty sure i have a PI intake...

Member

Member

Noob Slayer

...I can take it. I think.

Member

...I can take it. I think.

New Member

I love meat more than anything! I just have a spec

New Member

it doe snot

Member

it doe snot

it doe snot

Member

Similar threads

Privacy & Transparency

Privacy & Transparency