Im replacing the bushings on my front LCAs this week. The poly bushings I bought came with new sleeves. Should I have the old sleeves pressed out and replaced with the new ones or just press the new bushings into the old sleeves?
I posted on how I did my bushings a long time ago. They were regular. The bushing comes out with the metal sleeve. The new bushing goes in fairly easily. I can try and dig my post up about how I did it if you want.
My second post has the instructions of how I did it. I basically used a boat load of washers and some thread rod stock with some nuts. If you have a press you can do it MUCH faster that way.