Pulley on power steering pump??Please help??

L

lugger26

New Member

May 21, 2004

2

0

0

May 21, 2004

#1

• May 21, 2004

• #1

I actually have 2 questions? I own a 1992 5.0 LX. Recentely my power steering pump went out. I have decided to eliminate my ac and was wondering am i supposed to puchase a power steering pump with or without ac? I purchased the one w/o ac, but am wondering if it will work? Also, I have removed the power steering pump but cannot get the pulley off? Any suggestions would be great. I tried putting the pulley in a vice and loosening the bolt, but nothing? Any help would be great.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

May 21, 2004

#2

• May 21, 2004

• #2

u need a special pulley tool to get the wheel of the p/s autozone has them as a loaner. if i am understranding you right you dont want a/c right? well you can get a dead pulley to put in it's place.

 

L

lugger26

New Member

May 21, 2004

2

0

0

May 21, 2004

#3

• May 21, 2004

• #3

Yes I have taken out the ac

Yes I have removed the ac. Do I need to have the power steering pump with or w/o ac?n I also removed the smog pump. do i need to buy an ac eliminator kit?

 

Iowa91LX

Founding Member

May 6, 2001

2,616

0

0

Grundy Center, Iowa

May 21, 2004

#4

• May 21, 2004

• #4

I took mine to a friend who works at Ford. It is a PITA to get the power steering pulley off. A normal pulley remover will not work.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

May 21, 2004

#5

• May 21, 2004

• #5

lugger26 said:

Yes I have removed the ac. Do I need to have the power steering pump with or w/o ac?n I also removed the smog pump. do i need to buy an ac eliminator kit?

Click to expand...

you dont need to run a/c or power steering period. you can buy a belt to just run the water pump from the crank. i would do this rather than run 174183748137 dead wheel pulleys.