• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

push button start

  • Thread starter Thread starter ZephyrMotorspor
  • Start date Start date Apr 2, 2006
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 2, 2006
#1
  • Apr 2, 2006
  • #1
I'm trying to install a push button starter,i just need to know which wire on the ignition went to the starter or if i have to like go straight to the starter fromthe button?
 

ExplodingGopher

New Member
Jun 11, 2004
517
0
0
The mistake on the lake (Ohio)
Apr 2, 2006
#2
  • Apr 2, 2006
  • #2
mine is straight from the solenoid to the button, easier that way, never had any problems in two years either. Just make sure theres a fuseable link in there somewhere.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 2, 2006
#3
  • Apr 2, 2006
  • #3
See this diagram for help. Courtesy of TMoss (author) and S&2B's (site host).

Good luck.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 3, 2006
#4
  • Apr 3, 2006
  • #4
i have an on off switch already that goes to those two yellow 10ga wires that turns my ignition on when the key is in the on postion so im good there, but hey gopher, what does the starter solenoid look like? so i'll now, and please explain further on how you have it set up, like white amperage for the fuse, do i ground the button, etc? i have a 50a fusible link that i can put in there, will that be sufficient?
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 3, 2006
#5
  • Apr 3, 2006
  • #5
nevermind i got confused. now, do i put the wire from the button directly to that post on the solenoid, and ground the other side of the button, or...how do i do this? oh by the way i have a fusible link that im going to put a 15a fuse in, will it be enough?
 

ExplodingGopher

New Member
Jun 11, 2004
517
0
0
The mistake on the lake (Ohio)
Apr 3, 2006
#6
  • Apr 3, 2006
  • #6
The switched wire on the button needs to be spliced into the little wire that runs onto that little plug on the top/front of the solenoid (should be red/blue stripe color i think), use a good fuseable link (50 amps should do fine) on the wire going to 12V side on the switch. press the button and it starts.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 3, 2006
#7
  • Apr 3, 2006
  • #7
ZephyrMotorspor said:
i have an on off switch already that goes to those two yellow 10ga wires that turns my ignition on when the key is in the on postion so im good there, but hey gopher, what does the starter solenoid look like? so i'll now, and please explain further on how you have it set up, like white amperage for the fuse, do i ground the button, etc? i have a 50a fusible link that i can put in there, will that be sufficient?
Click to expand...
If you look at the schematic in the link I posted, you will find the info you seek, and it will be more efficient than running wire to the solenoid. If you tap into the circuit near the ignition switch, you should be able to retain the safety-switch, which is nice. It also saves some length of wiring.

You are switching relatively low amperage 12 volts to the solenoid.

Your call on how to do it. Good luck.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Apr 3, 2006
#8
  • Apr 3, 2006
  • #8
hey thanks a bunch gopher, works perfectly
 
You must log in or register to reply here.

Similar threads

D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
417
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
527
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
3
Electrical Starter solenoid green wire?
  • 387lx
  • Jun 1, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
264
Fox 5.0 Mustang Tech Jun 2, 2026
AeroCoupe
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
250
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?