question about my cam

89streetbeast

New Member
Dec 4, 2006
365
1
0
horton,ks
ok here is the specs for my cam http://www.cranecams.com/?show=brow...=302 C.I.&partNumber=444225&partType=camshaft

what i want to know is, when the site says the total valve lift is 513 intake and 529 exhaust is that with the 1.7 rockers or did they mess up and meant stock rocker ratio? im just confused i guess lol. if thats with the 1.7 rockers then pretty much i bought a mere version of the stock cam with just a tad bigger specs?

thanks
 
advertised specs for stock cam with 1.6s is 266/266 dur and .444/.444 lift

that cam u listed did list with 1.7s (take base lift at the cam and multiply by 1.7) but with 1.6s that cam it would make it .483/.497 the the advertised duration on it is 276/282

that cam u listed is alot bigger than stock. its nothing huge but its bigger.
 
looks like it should be a nice cam. Although i like a cam to run a little longer in the rpm then 5500rpm. it should run closer to 6500rpm if you plan on racing it any.


the cam works great, pulls pretty hard up to about 5800-6000. only thing i didnt like about it was it had no lope lol. but other than that its ran pretty strong for 2 years. one of these days i'll end up swapping it out for something else but havent decided yet.