question for tmoss or thumper

[Scones]

Hey guys,
just wondering what gaskets you guys recomend for the thumper/tmoss combo???

 

[mackey]

FP 1011-2 headgasket. But I am not tmoss or thumper. Felpro 1250 is my guess for intake to head.

FP-1415 is the exhaust gasket

 

[jb89coupe]

Don't use a 1415 for the lower intake... it's an exhaust gasket (a good one, though). For an intake set I've used the FMS kit a bunch of times and I've never had a problem (Summit #FMS-M-9439-A50).

 

[stang22]

Fel-Pro 1250's for the intake I believe. That's what I used... Here is a pick after pulled the lower off.

Tim

View attachment 516234

 

[mackey]

My Fault. I wasn't thinking. 1415 is the exhaust gasket and 1250 is the manifold to head. Thanks for correcting.

 

[tmoss]

If Mike's intake runner opening in 1.10" wide or less, then you can also use the FelPro gasket kit MS93334.

 

[stang22]

tmoss,

What's the difference between the 1250's and 1262's?

Tim

 

[tmoss]

1250 = 1.2"x2.0"

1262 = 1.28"x2.10"

 

[stang22]

1250 = 1.2"x2.0"

1262 = 1.28"x2.10"

Off the top of your head, do you know what size the Thumper ports are? The reason I ask is because I have Thumper heads and used 1250's, but it looks like I can trim the gasket a little bit more to make it match up. Just wondering if I should the 1262's instead? I have a ported typhoon for the lower. The picture above is mine. Thanks!

Tim

Sorry, didn't mean to hijack this thread...

 

[thumper460]

The heads are 1250 felpro's with Mr gasket ultra seal header gasket on the exhaust. The Mr gasket is a little taller than the 1415. Cool??

Just me..................

Thumper

 

[tmoss]

... but it looks like I can trim the gasket a little bit more to make it match up....

Trim the gasket and go.

 

[stang22]

Thanks guys!

Tim

 

[stang22]

The heads are 1250 felpro's with Mr gasket ultra seal header gasket on the exhaust. The Mr gasket is a little taller than the 1415.

Does anyone know what the part number is for the Mr. Gasket header gasket?

Tim

 

[thumper460]

they are "Mr. Gasket Ultra-Seal " you can get then at any auto zone, pep boys, and of course the Jegs , Summit, or PAW catalogs.. Jeg's number is 720-5834, Summit is MGR-5834 . cool?? I think the key here is Mr Gaskets number. 5834!! Have fun...

Just me........................

Thumper

 

[stang22]

That will do it Sir, thanks!

Tim

 

[stang22]

Mike,

The Mr. Gasket 5834's are the intake gaskets and not the header gaskets. Which intake gasket shoud I get for your heads, the 1250's or the MGR-5834's? I am confused now. I saw some MGR-5930's, but wasn't sure if those are the ones.

What header gaskets do you recommend? I am confusing myself? Anyone else?

Tim

http://store.summitracing.com/defau...sults=false&N=0&target=egnsearch.asp&x=29&y=9

http://store.summitracing.com/defau...sults=false&N=0&target=egnsearch.asp&x=29&y=9