Quick flywheel question

[big_tiger15]

I know on a stock 5.0 there is a 50 oz balancer, but now I need to know which way to put it on! I dont want to put the flywheel and it be all out of balance. the only kinda marker I see is a extra hole on the back of the crank. Do I put the extra weight on that side?

 

[Grn92LX]

The flkywheel only goes on one way. Keep turning it until all the bolt holes line up. Use loctite on the threads and tq to 80-90 ft/lbs.

 

[Realmongo]

The flkywheel only goes on one way. Keep turning it until all the bolt holes line up. Use loctite on the threads and tq to 80-90 ft/lbs.

 

[darthcual]

Ha, asked this same question bout 3 months ago. Put it up there and it was right on this first try. Begginers luck.

*Edit-I'll come over and help you

 

[BlownFiveLiter]

I'm pretty sure the torque spec calls for 75-85 lb ft. I've never used any loctite on the bolts though. I would use it on the driveshaft bolts though. I lost a couple bolts once (faulty torque wrench), and I was worried sick that I screwed something up.