• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Quietest Free Flowing Muffler

  • Thread starter Thread starter BelueLX
  • Start date Start date Oct 24, 2004
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 2 of 4 Next Last

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 24, 2004
#21
  • Oct 24, 2004
  • #21
Go online and have a look, then ask him about those under the 'universal' section. They don't just make for specific applications.

The fact is that there is an unserved market for a performance muffler that's not too loud for vehicles that don't run cats. That's probably the wild card. Removing the cats significantly noisies one up. There doesn't seem to be much in between factory oem and too loud - other than the dynomax super turbos. Which is probably what I'm going with next.
 
M

mat50ho

Founding Member
Jul 25, 2001
128
0
0
EGF, Minnesota
Oct 24, 2004
#22
  • Oct 24, 2004
  • #22
Borla pro xs are nice and
quite at idle
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Oct 24, 2004
#23
  • Oct 24, 2004
  • #23
5spd GT said:
I thought the race bullets were just flat-out loud ...or am I thinking of something else...

89sleeper - What were the temps and humidity the days you dynoed? That is interesting...
Click to expand...
Race bullets are a very loud muffler. It depends on what car they are on.

It was in the middle of summer in South Florida. I don't remember the exact temps and humidity but it usually around 90 for both. It was done on the same day.
 

Look Its Aaron

Your car looks like it came straight from Mexico.
Founding Member
Nov 18, 2001
2,634
0
48
Fontana, Cali
Oct 24, 2004
#24
  • Oct 24, 2004
  • #24
I have the race bullets. They own...

but I have also had the Borla Pro XS and the Dynomad Super Turbo mufflers. Both were quiet.
 
S

stangman8825

New Member
Dec 12, 2002
89
0
0
indiana
Oct 24, 2004
#25
  • Oct 24, 2004
  • #25
I've had three types of mufflers on my car, each with an offroad H-pipe. I had 3 chamber flows with turndowns, a dynomax super turbo catback, and the american thunder catback. The 3 chambers were quietest and the 2's are the loudest... dynomax was quiet but still quite noticable
 
7

7upstang

New Member
Sep 20, 2004
75
1
0
Calgary, Alberta
Oct 25, 2004
#26
  • Oct 25, 2004
  • #26
I use 3 chamber Flowmasters. The part that made the biggest difference for me was using an offroad X pipe instead of an H (BBK) I run long tubes and the Xpipe with the three chambers and my car sounds stock unless I lean on it.

I live in suburbia and work really late on the weekends so I need the quiet.

My 2 Cents.
 

syburstang

New Member
Sep 7, 2004
17
0
0
San Diego, CA from SA, TX
Oct 25, 2004
#27
  • Oct 25, 2004
  • #27
MAGNAFLOW SUPER TURBO'S....Even the mustang magazines say they are way too quiet. And they outflow the Flowmasters.
http://www.mustang50magazine.com/techarticles/10558/
check this link out

Also...the bullet's are race only if that matters....here is the dynomax website with thier muffler comparison
http://www.dynomax.com/mufflers.stm
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 25, 2004
#28
  • Oct 25, 2004
  • #28
"they are way too quiet. "

That's EXACTLY what I'm after; way too quiet for everyone else will be just about right for me.
 

ninjacoupe

New Member
Jul 6, 2003
174
0
0
NY
Oct 25, 2004
#29
  • Oct 25, 2004
  • #29
I had 2 chamber flows and the car was just loud and obnoxious. Magnaflows now are much quieter until I romp on it.
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Oct 25, 2004
#30
  • Oct 25, 2004
  • #30
You guys are only doing half the justice here. Post soundclips.

I have checked Mustangexhaust.com so many times, and they never update it seems.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#31
  • Oct 25, 2004
  • #31
I asked this very same question about a month or so back. Here are the answers I got if anyone is interested.....
http://mach1.pro3i.com/showthread.php?t=507556

....and for the record, I still have no idea what to get. LOL
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#32
  • Oct 25, 2004
  • #32
syburstang said:
MAGNAFLOW SUPER TURBO'S....Even the mustang magazines say they are way too quiet. And they outflow the Flowmasters.
http://www.mustang50magazine.com/techarticles/10558/
check this link out
Click to expand...
Just read the article....and judging by this, you must have meant to say the Dynomax Super Turbo's, not the Magnaflow Super Turbo's, right?
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Oct 25, 2004
#33
  • Oct 25, 2004
  • #33
jb89coupe said:
Sounds like it's time for a new girlfriend.
Click to expand...


That's what I'm thinkin'. She should just learn to deal with it or not ride in the car. As for avoiding the attention of Johnny Law, MAC's sound good with out being too loud. That's what I run without issues with "The Man".
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#34
  • Oct 25, 2004
  • #34
tjm73 said:
That's what I'm thinkin'. She should just learn to deal with it or not ride in the car. As for avoiding the attention of Johnny Law, MAC's sound good with out being too loud. That's what I run without issues with "The Man".
Click to expand...
Ughhhhh, are you kidding? Mac's are as loud as 2-chamber Flows and they drone like crazy. Don't get me wrong, they sound good and very muscular, but quiet, they are not.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 25, 2004
#35
  • Oct 25, 2004
  • #35
Gearbanger - I'm in the same boat as you. I've been experimenting with different bits and pieces for over 2 and half years and it's still too loud.

Originally an F-body single inlet, dual outlet Flowmaster. Followed that with a custom-ordered Bassani Quiet Thunder. It was fine a for about a month and then got extremely loud. Followed that with a SpinTech RV muffler with a single SpinTech resonator upstream. Liked the sound/volume but wanted to re-configure the backend for a center outlet exhaust tip (right in the middle of the car) so I ordered a reconfigured SpinTech muffler (actually a sprint car muffler) and a second resonator - that combo was way too loud. So I pulled off the 2 inline SpinTech resonators and replaced the with a Magnaflow 3" in/out - it's even louder than the resonators are.

That does it. No more $$ on the exhaust til I'm certain I can quiet it down. So I'm gonna try a stock C5 Corvette set up on mine (will fit on mine I think; not on a Stang). If that doesn't work, then the biggest, quietest dynomax super turbos I can find.
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Oct 25, 2004
#36
  • Oct 25, 2004
  • #36
Here is my exhaust setup with 2 chambers, x pipe, and eq lengths...
http://portfolio.iu.edu/jaspittm/exhaust/jasons_f_cam_x_pipe.wav
WAY too loud
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#37
  • Oct 25, 2004
  • #37
Michael Yount said:
Gearbanger - I'm in the same boat as you. I've been experimenting with different bits and pieces for over 2 and half years and it's still too loud.

Originally an F-body single inlet, dual outlet Flowmaster. Followed that with a custom-ordered Bassani Quiet Thunder. It was fine a for about a month and then got extremely loud. Followed that with a SpinTech RV muffler with a single SpinTech resonator upstream. Liked the sound/volume but wanted to re-configure the backend for a center outlet exhaust tip (right in the middle of the car) so I ordered a reconfigured SpinTech muffler (actually a sprint car muffler) and a second resonator - that combo was way too loud. So I pulled off the 2 inline SpinTech resonators and replaced the with a Magnaflow 3" in/out - it's even louder than the resonators are.

That does it. No more $$ on the exhaust til I'm certain I can quiet it down. So I'm gonna try a stock C5 Corvette set up on mine (will fit on mine I think; not on a Stang). If that doesn't work, then the biggest, quietest dynomax super turbos I can find.
Click to expand...
Mike, I'm looking pretty closely at a pair of the Magnaflow XL 3-chamber 4x9 ovals (model number13256) set up right now. From the few sources that have pointed me toward them, they seem to be the quietest sounding, with the most flow potential. Whatever I choose has to move enough air to support 9psi and around 425fwhp. And at the same time, has to fit the constraints of the little muffler space given with my '96 Cougar. These particular mufflers have a 24" over all body, with an 18" canister, so it might be tight for my needs. According to Magnaflow though, the longer the muffler, the quieter the tone. I’ll be combining them with a custom mandrel bent system consisting of a custom X-pipe and 2 high-flow cats (probably Magnaflow as well).
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 25, 2004
#38
  • Oct 25, 2004
  • #38
How is that muffler configured on the inside? Mine is the 18" casing/24" overall. It is straight through with a perforated full size tube inside, packed with sound deadening material on the other side of the perforations. Adding it did virtually nothing to quiet down the SpinTech.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#39
  • Oct 25, 2004
  • #39
These are a chambered design, not strait through.

Direct quote from the Magnaflow site...
"MagnaFlow XL 3 Chamber Mufflers use a unique combination of large diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower.

The sound baffles tune the sound waves using calibrated tuning gate openings that allow portions of the waves to pass through. These tuned waves reflect off the back wall of the muffler and cancel out unwanted harsher sounds.

The large diameter perforated core eliminates the flow restrictions of a louvered style core. A careful balance between perforation size/spacing and the baffle tuning gate make for a great 3 chamber performance muffler."
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 25, 2004
#40
  • Oct 25, 2004
  • #40
Here's the link if you want to check out any particular sizes....
http://www.magnaflow.com/02product/xl/xlchamber.htm
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 2 of 4 Next Last
You must log in or register to reply here.

Similar threads

Looking To Quiet My 5.0 Down A Bit.
  • Gunmonkey
  • May 5, 2016
  • Fox 5.0 Mustang Tech
Replies
17
Views
3K
Fox 5.0 Mustang Tech May 10, 2016
Gunmonkey
Fox Exhaust Question
  • dz01
  • Apr 29, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 28, 2014
deathb4dismount
highest flowing factory mufflers
  • Shaolin Crane
  • Nov 5, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 8, 2011
1991notchbackLX
  • Locked
Expired 1999 Mustang Gt/steeda/scca Upgrades
  • Stang99steeda
  • Sep 17, 2013
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
4K
SN95 Mustangs For Sale (1994-04) Sep 22, 2013
Stang99steeda
Achieving Quieter Exhaust...
  • TruPower
  • Dec 31, 2011
  • SN95 4.6L Mustang Tech
Replies
9
Views
3K
SN95 4.6L Mustang Tech Jan 2, 2012
sneaky98gt
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?