Race results with 3.31 gear woodburn

[McMillin]

Track condition poor... 2007 gt
Lots of wheel spin...could be me
15-20+ mph head wind
made 7 runs this is my best times
60ft....2.166
330....5.868
1/8th...8.864
mph.....82.82
1000ft...11.450
1/4.......13.603
mph.....106.37

not so good...but Im new at racing cars, Lots of tire spin I need to work on that.
I had Hillers in woodburn install, Roush s/c, Roush short throw shifter, Borla ex,
Eibach pro springs. I never got out of 3rd gear it seems to be geared pretty high.
And my in put on the roush shifter the 2-3 shift can be tricky it could be me but it seems kind of tight. I am looking for some 17" take off wheels in the oregon area
I live on the coast so I thought shop around here first. JM

 

[saleen556]

Track condition poor... 2007 gt
Lots of wheel spin...could be me
15-20+ mph head wind
made 7 runs this is my best times
60ft....2.166
330....5.868
1/8th...8.864
mph.....82.82
1000ft...11.450
1/4.......13.603
mph.....106.37

not so good...but Im new at racing cars, Lots of tire spin I need to work on that.
I had Hillers in woodburn install, Roush s/c, Roush short throw shifter, Borla ex,
Eibach pro springs. I never got out of 3rd gear it seems to be geared pretty high.
And my in put on the roush shifter the 2-3 shift can be tricky it could be me but it seems kind of tight. I am looking for some 17" take off wheels in the oregon area
I live on the coast so I thought shop around here first. JM

Look on the bright side. You did better than I did my first trip down that track . I had a $250 tow bill . With some practice you will definetley see better times.

 

[DNA DOA]

Not too bad actually. My first fun with the Notch was a 13.33, 4 runs later I blew the stupid thing up. ( I had to get towed too, but I don't want to talk about that) Atleast your car runs. So I have spent over 3k on new and shiny parts. Sometimes breaking isn't such a bad thing after all.

 

[McMillin]

I found a couple of rims so I am not looking anymore. JM