Radio Install Help

87GT Drop Top · May 1, 2009

Hi,
I just bought an 87 GT convertible 2 weeks ago and I love it. I need some help from all you Mustang experts.
My 87 GT came with the factory EQ. I removed the stock unit. I have a Kenwood head unit with the factory harness adaptor. I wired in everything and I have no sound from the speakers. I know the head unit is good because I unpluged the Kenwood I have in my truck and plugged it into my truck and it works fine. I would guess that the EQ plug has something to do with it, but what do I have to do to make it work? Please help.
Thanks
Frank

T1 3VOM · May 1, 2009

http://forums.stangnet.com/677585-please-help-radio.html

http://forums.stangnet.com/732323-no-sound-new-head-unit.html

I had the same problem. I'm not sure about the EQ, but your problem sounds like mine, and all I had to do was bypass the stock amp. Read through these threads and it should get you started.

S&B · May 1, 2009

you need to bypass the amp

87WhiteStang1 · May 1, 2009

IMO the easiest way to do it is to get some speaker wire and run speaker wire straight from your new head unit to your speakers. did that with mine and it works great

87GT Drop Top · May 1, 2009

Ok. I have the whole interior out, so that makes it a lot easier. The amp is mounted right behind the console to the hump. I unbolted & unpluged it. Then I found the other 2 connector that the radio install harness plugs into. Now I have rear speakers and dash speakers, but no door speakers. Any more advice on gettin the door speakers working.
Thanks
Frank

S&B · May 2, 2009

i have never messed with the stock setup so i may not help you, I assume that you cant run both sets through your aftermarked HU b/c you only have hook ups for 4 speakers and your trying to hook up 6. the factory amp probably treated the front 4 speakers as a component set. If you still have the stock setup my goat would be to get the door speakers going and F
the dash speakers they are chit.

the pony boy · May 3, 2009

if you take the harnees for the amp and follow it where it goes in the dash some where around the glove box there another connection.diconect that conection and plug the radio harnees into that.that will bypass the amp and you will be in business.gdlk phil

87GT Drop Top · May 3, 2009

the pony boy said:
if you take the harnees for the amp and follow it where it goes in the dash some where around the glove box there another connection.diconect that conection and plug the radio harnees into that.that will bypass the amp and you will be in business.gdlk phil

I found that, but only the dash speakers and the rear ones worked. I got sick of messing around. I followed the door speaker wires to the connector. I snipped them off and spliced them into the fronts and now it's working fine.
Thanks for all the help
Frank

mob · May 3, 2009

Just run new speaker wire from the speakers to the back of the headunit

Whoops didnt see u fixed it

Radio Install Help

87GT Drop Top

Member

T1 3VOM

Member

S&B

I hate my CT. :(

87WhiteStang1

Member

87GT Drop Top

Member

S&B

I hate my CT. :(

the pony boy

87GT Drop Top

Member

mob

the guy who hits on his mom

Similar threads

Radio Install Help

Member

Member

I hate my CT. :(

Member

Member

I hate my CT. :(

Member

the guy who hits on his mom

Similar threads

Privacy & Transparency

Privacy & Transparency