I did that, to get the lack in the actual line, that's in place, but I can't seem to pull enough of the cable out to snag it back behind the spring so that the brakes can actually be put on. Maybe I just need to start eating my wheaties!!!!flsteed said:Dr. B , you have to detach the -brake cable hangar temporarily to get enough slack.
Dr. Black said:Maybe I just need to start eating my wheaties!!!!
2001sleeper said:many make this sound, it will subside as everything gets worn in. the sound is the brake bad gasses quickly escaping the drilled holes. it is normal.
pics pleaseflsteed said:I recently had the 13" kit installed on the rear of my car, however it is making a sound like a card in bicycle spokes while braking. Anyone else experience this ? How did you remedy it??? TIA
Lots of people who get the 13' rear brake setup from baer run into the problem with not enough slack in the parking brake line. I believe in the instructions, they show the caliper mounted in the stock upper right position. A solution to this is to flip the mounting brackets around to where the caliper is mounted to the lower right position. This allows enough slack to re-attach the brake line. If you look on Baer's site at some of the customer cars, you'll see a guy that has his calipers mounted this way. If you call Baer, they should confirm this.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?