• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rear DIfferential Fill/Drain Plug

  • Thread starter Thread starter savegoodautonfg
  • Start date Start date Jul 27, 2006
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 27, 2006
#1
  • Jul 27, 2006
  • #1
I don't have one at all anywhere on my rear differential cover. I was wondering could i just drain it by unbolting the bolts and i could fill it up by puttin on all of the bolts except the top one and filling thru there?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 27, 2006
#2
  • Jul 27, 2006
  • #2
There's a fill plug on the front of the housing.

The drain plug issue is one reason girdles are so popular.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 27, 2006
#3
  • Jul 27, 2006
  • #3
Where on the front of the housing?

I can't find it.

Can you please find me a picture hissin?
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jul 27, 2006
#4
  • Jul 27, 2006
  • #4
I don't have a picture, but it's kinda tucked away in there. On the drivers side I believe. It's not real noticible, you remove it with a 3/8 extension. The plug just has a 3/8 square hole in the front. It's up towards the top. Feel around and you'll find it.

You drain it by taking off the back cover. Remove all the bolts except the top center one. Loosen the top center one a little, and crack the cover loose. You leave the one bolt so the cover doesn't fall off all the way, and get fluid everywhere.

EDIT: here's a pic I found on google, I circled the fill plug.



Jeff
 

Attachments

  • 8.webp
    18.2 KB · Views: 2,527
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 27, 2006
#5
  • Jul 27, 2006
  • #5
thanks for the pic now if i look under my car and the rear diff cover is facing me from the back of the car is that what this picture is showing or no
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 27, 2006
#6
  • Jul 27, 2006
  • #6
do you see the mans hand in the picture (bottom left) thats where the driveshaft is mounted.its hard to see from under the car because of that fin you see in the picture but its up there on the drivers side looking back at the axle from the driveshaft...
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jul 27, 2006
#7
  • Jul 27, 2006
  • #7
The pic is showing the front if the differential. If you crawled under there and looked from the transmission, that is what you should see.

Jeff
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 27, 2006
#8
  • Jul 27, 2006
  • #8
That sounds good so that means if im looking at the cover from the back of the car then its like on the other side of what i can see.
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
Jul 27, 2006
#9
  • Jul 27, 2006
  • #9
savegoodautonfg said:
That sounds good so that means if im looking at the cover from the back of the car then its like on the other side of what i can see.
Click to expand...

Unless you get the car up on a lift, you probably won't see the fill plug. Just feel around for the square hole in the front of it, and put a 3/8" extension in it to remove.

You'll probably want to get a cheap fluid pump to fill the housing, since it's nearly impossible to get a bottle of gear lube anywhere near the fill hole. For $5 to $10 you can get a pump that screws onto the top of the bottle. It takes about 2 qts, 8 ounces to fill -- 2 qts, 4 ounces of lube and a 4 ounce bottle of friction modifier does the trick.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 27, 2006
#10
  • Jul 27, 2006
  • #10
Very nice input from everyone.

One other thing: When you go to loosen the fill plug (do this before removing the cover so you know if it's an issue before you remove the fluid), I'd recommend you wear your Mechanics gloves. More than one member in here has ripped his hand open on metal in the area when the fill plug breaks loose.

Good luck.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Jul 27, 2006
#11
  • Jul 27, 2006
  • #11
Be prepared to throw away all the clothing that you are wearing. That stuff stinks worse than anything I've ever smelled. I tried to fill it without the pump (bad idea) and ended up getting soaked. The day I changed the fluid was a bad day for me.
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
Jul 28, 2006
#12
  • Jul 28, 2006
  • #12
HISSIN50 said:
One other thing: When you go to loosen the fill plug (do this before removing the cover so you know if it's an issue before you remove the fluid).
Click to expand...

If that's the case, then you can remove the vent from the top of the right side axle tube, and fill through the hole. I forget what size wrench it takes -- 9/16" perhaps?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 28, 2006
#13
  • Jul 28, 2006
  • #13
TRWXXA said:
If that's the case, then you can remove the vent from the top of the right side axle tube, and fill through the hole. I forget what size wrench it takes -- 9/16" perhaps?
Click to expand...
While this is correct, I dont go off of fluid specs when filling - I watch for it to come out the fill plug. I'd use the vent for convenience of pouring, but still need the fill plug to come off.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Aug 6, 2006
#14
  • Aug 6, 2006
  • #14
Is the fill plug going to be hard to remove?
 
You must log in or register to reply here.

Similar threads

Clicking sound from driveshaft/rear differential
  • matthewt
  • Aug 27, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
2
Views
204
2015 - 2023 (S550) Mustang -General/Talk Aug 28, 2026
matthewt
Engine Code 41 again
  • Creomod
  • Jul 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
868
Fox 5.0 Mustang Tech Jul 11, 2026
Mcmahst
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
1K
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
Proper Transmission fluid for a 84nwc t5
  • Sask84gt
  • Mar 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
896
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
Sask84gt
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?