On my 65 convert restomod I have 1 inch lower springs in front and the rear leafs are 665Lb rated 4 leaf but the car seems a little low in the rear. I also have racing shackes and there at the highest hole. The springs are only 3 years old. Does anyone know the ride height before I buy new springs.
I want the rear a little higher than the front, Horse power is about 450 with blower. What are you running,
PICS, PLEASE
I want the rear a little higher than the front, Horse power is about 450 with blower. What are you running,
PICS, PLEASE
67topless
Member
Check out this thread from last week:
http://forums.stangnet.com/showthread.php?t=628705
I can send you some pics this afternoon,
Scott
PS That is a great looking 65 you've got going on there.
http://forums.stangnet.com/showthread.php?t=628705
I can send you some pics this afternoon,
Scott
PS That is a great looking 65 you've got going on there.
Thanks Scott,, its always changing. Would like to see pics of your car with those springs. I still dont know what to order
67topless
Member
Sorry for the delay... took some pic's today. You can see the difference from front to rear... over two inches.
I have some other pic's from today listed here as well:
http://home.nc.rr.com/hot67ponypage/
I am waiting on the new spring perches which I should get next week and then I'll be able to drop the front to match.
Best of luck,
Scott
I have some other pic's from today listed here as well:
http://home.nc.rr.com/hot67ponypage/
I am waiting on the new spring perches which I should get next week and then I'll be able to drop the front to match.
Best of luck,
Scott