• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

rear upper strut mounts

  • Thread starter Thread starter Torinalth
  • Start date Start date Aug 8, 2005
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Aug 8, 2005
#1
  • Aug 8, 2005
  • #1
I was working in the back of my car yesterday finishing my amprack, rear seat delete, and the rear of the rear wireing i have been neglecting. well, i was looking over the upper strut mounts while back there (HR springs came today and Bilsteins come tomorrow says UPS) and noticed something that i am not sure if its an issue or not.

looking at the drivers side mount it looks, well, normal, then comparing it to the passenger side mount it looks almost 1/4-1/2 inch higher.... if you look at the mounts you have the bolt comming through the middle, a lil frisbee under the nut, and the rubber piece underneath that then the rear shock tower.... well, it looks like the spacing between the left and the right that the passenger side is.. well... gaped more.

is this normal, my thinking is no, and what do i need to look into if anything for fixing it... or do i wait and see what i run into when i do my suspension in the next couple days.

Torinalth
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Aug 8, 2005
#2
  • Aug 8, 2005
  • #2
Mine did not look like that. You should relieve the stress on the shocks and reseat the top nuts and rubber busing on the top of the shocks.
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Aug 9, 2005
#3
  • Aug 9, 2005
  • #3
I just got my HRs and isolators in yesterday and UPS tracking shows my bilsteins are at my doorstep now.... so i am going to be replacing it all either saturday or sunday... not ever playing with the stang suspension before how is the unit actually attached... well... to keep from going anywhere... or is it like a sandwich that presses a plate from the bottom of the tower against the bushing and then capped by the top piece thhat the bolt rests on. my damn helms is at home or i'd look myself...

Torinalth
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Aug 9, 2005
#4
  • Aug 9, 2005
  • #4
There is a rubber insulator that fills a large hole around the top of the shock shaft. It insulates the body from that shaft with rubber and the metal "frisbee" caps it down just like the dust cover on the front struts. You will easily understand it when you pull it apart... The Bilstiens will probably come with all new pieces for that area...
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Aug 9, 2005
#5
  • Aug 9, 2005
  • #5
heh, so it might be solved before i need to figure out out then.... wonderful. I'll post pictures this weekend if the problem is still there. thanks for the heads up.

Torinalth
 
You must log in or register to reply here.

Similar threads

3
Rear mounted battery distribution blocks?
  • 387lx
  • Mar 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
403
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 14, 2026
JD1964
Salvage/rebuilt title question
  • djj62478
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
209
1996 - 2004 SN95 Mustang -General/Talk- Oct 2, 2026
DadLife0724
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Monday at 4:00 PM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
337
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Yesterday at 8:51 AM
Rdub6
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
959
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
Suspension Is somethig Wrong Here?
  • Icemanxxxv
  • Jul 11, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
222
Fox 5.0 Mustang Tech Jul 11, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?