So a little background, this is my first time posting on this forum, I recently picked up an 87 gt project. I grew up working on imports so I don't have a ton of experience with american muscle cars. I've started to tear into the car and I quickly discovered that the car has no o2 sensors hooked up, no "low oil" connection(It's just plugged on the oil pan) and no o2 harness.
I've done some reading and apparently back in the day people used to unplug the o2 sensors because at WOT the computer ignores the o2 sensors but this makes driveability worse. Does this sound right? Car seems to hesitate quite a bit at partial throttle but when you put your foot down to the floor she goes. This is going to be a street car so I need to figure out how to add the 02 sensors and harness. I'm having a hard time even locating where the o2 harness would plug into the main harness in the engine bay, can't find a good wiring diagram anywhere.
I've done some reading and apparently back in the day people used to unplug the o2 sensors because at WOT the computer ignores the o2 sensors but this makes driveability worse. Does this sound right? Car seems to hesitate quite a bit at partial throttle but when you put your foot down to the floor she goes. This is going to be a street car so I need to figure out how to add the 02 sensors and harness. I'm having a hard time even locating where the o2 harness would plug into the main harness in the engine bay, can't find a good wiring diagram anywhere.