Replacement carpet in a foxbody

PRO50SC said:
Who has replaced their carpet in their fox? Where did you buy it? How was the quality and the fit? :shrug: Recommendations wanted please.
Thanks :) :hail2:

Bernie,
I replaced my gray carpet with new black carpet about 2 months ago. Used the set from 5.0 Resto, fit absolutely perfect! No problems what-so-ever! Also put in '03 GT seats and some other stuff. If you go to the Bennegan's with us this weekend you'll see it, I plan on driving the car as long as it's nice out. :nice:
 
dreddstang said:
Bernie,
I replaced my gray carpet with new black carpet about 2 months ago. Used the set from 5.0 Resto, fit absolutely perfect! No problems what-so-ever! Also put in '03 GT seats and some other stuff. If you go to the Bennegan's with us this weekend you'll see it, I plan on driving the car as long as it's nice out. :nice:
Great, I plan on going too. Did you see the 2 threads I posted on MM&F? Check it out.
Thanks Chris
 
Got mine at the Mustang Depot on eBay for about $90 fit is pretty good BUT rear at bottom of seat is a little puffy looking. Afraid that is the way the original was too but was hoping for better! BTW it was drop shipped by ACC directly to me for $10.
 
Yeah Bernie, I saw them. Just was not sure until a little while ago if I'd have the weekend off. Looks like I'll be there, though.

by the way, the carpet set from 50Resto cost $89, they don't charge shipping, and it showed up in a few days. :nice:

Also, if you've got a gray & black interior like most Foxes, black carpet looks great! Goes very well with the black trim on the dash, console and doors! :nice:
 
Black331Stang said:
o did u guys just order the carpet alone form 50resto? or did u get that kit?


I just got the carpet. I let it set in the car for a day or 2 before I tried to put the seat in. Just to let it lay flat. Then I stroked it into the corners. Looks great! Even with the cutouts for the roll bar!
 
Yeah, I just ordered the carpet also. Did not need the rest of the kit. Let the Carpet lay out for a day in The Garage, then stripped out the old interior, installed the new, then let it sit for another 2 days while I was waiting for the new seats to show up. Took me 20 minutes to bolt in the new power seats and all done!