4.6litrebeater New Member Jun 18, 2004 113 0 0 San Diego, CA Oct 9, 2004 #1 Oct 9, 2004 #1 i just got a valve job and am replacing the headgasket. how do i go about retiming the cams? i have the crank at TDC on cylinder #1 but am not sure where to line up the cams
i just got a valve job and am replacing the headgasket. how do i go about retiming the cams? i have the crank at TDC on cylinder #1 but am not sure where to line up the cams
P Pitch Black New Member Jul 17, 2004 369 0 0 TX Oct 9, 2004 #2 Oct 9, 2004 #2 www.steeda.com > mustang > engine > 4.6L timing adjuster
GT2000JAY Founding Member Oct 22, 2002 1,344 0 0 Northwest Oct 9, 2004 #3 Oct 9, 2004 #3 There is an excellent article by Keith (phatdoggy) on modulardepot.com that should help you time the engine. Go to the homepage and click articles. Jay
There is an excellent article by Keith (phatdoggy) on modulardepot.com that should help you time the engine. Go to the homepage and click articles. Jay