Reverse manual valve body question

[my66coupe]

With a reverse manual valve body in place of a stock valve body, will i have to upgrade vacumm modulators? Would i need a vacumm modulator at all? I was just thinking about this before i actually do the swap.
Thanks

mike

 

[mustang70]

You shouldn't need the modulator at all. You're controllig the shifting so there isn't a need for it.

 

[mustang70]

Double post. The site doen't seem to like me right now.

 

[blandq]

A reverse valve body DOES not mean a manual valve body. However, IF you are going to stay auto-magic on the trans, in my opinion without manual control, especially of a classic c-4 torque-o-matic go standard tranny. The C-4 is an outstanding building block but in it's stock mustang form, it's simply not very intersting!

 

[bud4660]

A reverse valve body DOES not mean a manual valve body. However, IF you are going to stay auto-magic on the trans, in my opinion without manual control, especially of a classic c-4 torque-o-matic go standard tranny. The C-4 is an outstanding building block but in it's stock mustang form, it's simply not very intersting!

Since a reverse valve body works backwards, you mean you dont have to manually shift it? I know they have air shifters for them. But I didnt know the tranny would work on its own? Thats interesting.

 

[302 coupe]

Why would you switch to a reverse valve body if you weren't going to shift it manually? That would kinda defeat the purpose it seems......

 

[my66coupe]

Ditto to above.... yes I am talking about a Manual valve body as stated in my original thread. Can anyone clarify what mustang70 said? Thanks guys

Mike

 

[classic boost]

you don't need a modulator at all. the modulator is what your tranny uses to determine shift points. with the manual v/b, it's not used/needed.