• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

reversed battery wires

  • Thread starter Thread starter nonglossjason
  • Start date Start date Jul 19, 2006

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Jul 19, 2006
#1
  • Jul 19, 2006
  • #1
last night i couldnt really see and mixed up the wires on the battery. which fuses did i blow so i can fix them and drive my car thanks
 
D

DeVus1

Founding Member
Mar 29, 2002
400
2
28
P-Town, Va.
Jul 19, 2006
#2
  • Jul 19, 2006
  • #2
Have you tried starting the car since you mixed up the wires? Only two ways to tell if a fuse may be blown:

If a certain accessory isnt working or visually check the fuse.
 

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Jul 19, 2006
#3
  • Jul 19, 2006
  • #3
checked all the fuses nothing blown. No power at all to the car. I know this is stupid but what could it be?
 
D

DeVus1

Founding Member
Mar 29, 2002
400
2
28
P-Town, Va.
Jul 19, 2006
#4
  • Jul 19, 2006
  • #4
Might have ruined the battery. Have you checked it with a multimeter? Either that or switch our for another battery?
 

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Jul 19, 2006
#5
  • Jul 19, 2006
  • #5
i tried, the battery is still good.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jul 19, 2006
#6
  • Jul 19, 2006
  • #6
Reversing the polarity, there's a good chance you fried several electrical components, including the ECM. DeVus1 is on the right track with the multimeter, but I suspect you need to use it on a lot more than just the battery. Are there any bad fusible links? Anything smell burnt? Any evidence of burned components anywhere? I wouldn't know where to begin other than checking some basic things, so I have a bad feeling that you're in for countless hours with a multimeter and jrichker's wiring diagrams.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 19, 2006
#7
  • Jul 19, 2006
  • #7
Check the fuseable links: they all live in a bundle up next to the starter solenoid.

Diagram courtesy of Tmoss & Stang&2birds



See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif
 

Attachments

  • fuel-alt-links-ign-ac.gif
    83.1 KB · Views: 208

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Jul 19, 2006
#8
  • Jul 19, 2006
  • #8
**** i would not know where to start
 

RoadKill96

New Member
Mar 1, 2006
39
0
0
Victorville CA
Jul 20, 2006
#9
  • Jul 20, 2006
  • #9
oh you mite have fried your alt also
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
Jul 20, 2006
#10
  • Jul 20, 2006
  • #10
Back in the day my first car was an 84 ltd. I put the battery in and my boss stopped me and reversed what I was about to do....he hooked it up backwards. It caused a small fire but the only thing I had to replace was the soleniod on the fenderwell wall. I hope this is all you have to do (I guess its highly unlikely but good luck).
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 20, 2006
#11
  • Jul 20, 2006
  • #11
nonglossjason said:
**** i would not know where to start
Click to expand...
In that case, either plan to spend a bunch of $$$ to have someone else fix it, or sell the car as a rolling chassis.

Back to the diagram I posted:
The yellow wire on the starter solenoid is the feed to several of the fuse links. Split the wiring harness open and follow it until it branches off into several wires. That's the first fuse links. The fuse links will be a different color from the wire they connect to. There is also a separate fuse link for the computer in the same area. Use a test light with one side grounded to any bare spot on the chassis. If you test lamp has a pointed end, use it to probe through the insulation. If not, then use a safety pin. Check the fuse links on both sides, where it connects to the feed from the battery and on the other side where it goes off into the harness. If the light does not light up on both sides of the fuse link, it is bad. Fuse link wire is available at most auto parts stores. The color tells you what the fuse rating is.

It will take you about 30 minutes to split the harness open to expose the fuse links, about 3 minutes to test each link and about 15 minutes each to repair any bad ones you find. When you are done, it will take another 30 minutes to wrap the harness back up nice and neat.


See http://fordfuelinjection.com/?p=7 for some help soldering so that you will do it right the first time.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jul 20, 2006
#12
  • Jul 20, 2006
  • #12
Been there done that..in my case the victims of the experience were:fried alternator, fried headlight switch, fried TFI....you're going to have to do some checking now but the ECU likely survived the incident.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
534
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
607
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Resolved Wiring electric fan
  • cbac89
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
241
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
cbac89
G
2000 GT- Alternator not charging
  • grugug
  • Nov 10, 2026
  • SN95 4.6L Mustang Tech
Replies
10
Views
145
SN95 4.6L Mustang Tech Nov 12, 2026
squeak93
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
395
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?