• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ring and Pinion

  • Thread starter Thread starter 90limited
  • Start date Start date Aug 18, 2008

90limited

Founding Member
Apr 13, 2002
276
3
18
Port Charlotte FL
Aug 18, 2008
#1
  • Aug 18, 2008
  • #1
Just got the new gears in... Do they need some breakin time or can I hammer down?
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 18, 2008
#2
  • Aug 18, 2008
  • #2
You NEED to break-in the gears. Some people will say as much as 500 miles. I did a LOT of research before changing my gears and some sources say that the leading cause of early failure with gears is lack of a proper break-in.

I had read somewhere that you can drive the car LIGHTLY 30 minutes (constant driving, including some upshifting and downshifting, up to speeds of 60mph or better) a day for 3 days, allowing full cool down in between (overnight), and after the 3 days, the gears are ready to be thrashed. That being said, I waited 500 miles before I beat on mine.

Check out Yukon Gear's installation instructions. It talks about break-in:

http://www.yukongear.com/Downloads/Technical_Help/Installation_Kit_Instructions.pdf
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Aug 18, 2008
#3
  • Aug 18, 2008
  • #3
3 heat cycles, hammer down.
 

Warbird19

Founding Member
Sep 27, 2001
742
0
16
Washington, Federal Way
Aug 18, 2008
#4
  • Aug 18, 2008
  • #4
Id break it in alot more than three heat cycles. I would drive 350-500 miles and do it right. Ive done many gear installs and what your trying to do is to allow time for the pinion and ring gear to wear into eachother. A heat cycle isnt a accurate measurement of break in. It is important however to generate heat cycles, and not to drive really far the first time you drive the car after a gear swap. Pinon bearings and carrier bearings have a set prelaod and will generate alot of heat.
 

90limited

Founding Member
Apr 13, 2002
276
3
18
Port Charlotte FL
Aug 19, 2008
#5
  • Aug 19, 2008
  • #5
Wow... Glad I asked. The bad part for me is that 400 miles is a months worth of driving. I only put on about 5000 per year. I guess I will be making more milk and bread runs this month when the weather is nice.....
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 19, 2008
#6
  • Aug 19, 2008
  • #6
Yea, it took me forever to do it, too. I was still in school when I did mine, and campus was only like 5 miles away, so I would have had to make 50 trips to and from to get that 500 mile mark. I think after a few short trips, I made a few long ones to make up the mileage, though.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Aug 19, 2008
#7
  • Aug 19, 2008
  • #7
im with bentley on this one heat em up a couple cycles , swap the grease out and hammer down.
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Aug 19, 2008
#8
  • Aug 19, 2008
  • #8
Call any big time race shop, think they drive 500 miles with their race car to break in the gears? Ah, no. Make a few laps around the parking lot of the track let it cool, do that a few times then go out and run 8's. Friend of mine just put a 9 in his fox, the builder said make a few runs down the street and let it cool. Do that a few times and put the hammer down. This is in a very serious street car.
 

putnam88

Member
Aug 2, 2006
102
0
17
tavares
Aug 19, 2008
#9
  • Aug 19, 2008
  • #9
i would have to agree with everyone if u put some driving time on them then u give them time to develop a wear pattern. gears aren't like a motor a motor with rely on the rings being set by the heating and shrinking of all the components. if u don't let a wear pattern start u could be binding
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 20, 2008
#10
  • Aug 20, 2008
  • #10
if this is true when why dont you have to do this on a new car? I assume that the rear gear is new too......
 

putnam88

Member
Aug 2, 2006
102
0
17
tavares
Aug 20, 2008
#11
  • Aug 20, 2008
  • #11
if u read ur owners manual it probably says u need a break in period usually is about 500mi
 

wildstang90

New Member
Nov 24, 2004
87
0
0
Bristol, TN
Aug 21, 2008
#12
  • Aug 21, 2008
  • #12
I never did any kind of break in for mine I guess I just got lucky. I had my gears done on friday drove 5 miles home saturday drove 20 miles to the track and made 10 passes. Drove that car as a daily driver for the next 4 years with it seeing the track about every weekend.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 21, 2008
#13
  • Aug 21, 2008
  • #13
not sure about the breakin period, if its gonna fail it will do it regardless of this magic 500 mile period. Oh well. ;o)
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Aug 21, 2008
#14
  • Aug 21, 2008
  • #14
Exactly, as long as there isn't any noise or anything like that just give it a few heat cycles and then put the hammer down.
 
1

1996Z15

New Member
Apr 17, 2005
6
0
0
So. New Jersey
Aug 23, 2008
#15
  • Aug 23, 2008
  • #15
I need to have new gears installed in my car; anyone have a mechanic near Atlantic City, NJ that they'd recommend and what should I expect to pay if I supply the gears?
 
You must log in or register to reply here.

Similar threads

Engine Are These rings OK?
  • PonyGTrider
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
338
Fox 5.0 Mustang Tech Sep 26, 2026
PonyGTrider
K
Drivetrain '87 5.0 Installing New Ring Gear and Pinion - Pattern Questions
  • karhoot
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
577
Fox 5.0 Mustang Tech May 9, 2026
Mindseye007
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
703
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
344
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
D
Transceiver Ring
  • dtarang
  • Aug 22, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
93
1996 - 2004 SN95 Mustang -General/Talk- Aug 22, 2026
dtarang
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?