Roll-cage questions

[nickthegenius]

I know my car isn't currently quick enough to need one, but I'm hoping to get deeper into the twelves N/A this coming year. Then, if I get some juice later

Anyhow, what this all leads to is that one of my mods this winter will be a rear seat delete. I like to TopLine kit on Partshopper and would like to support Stangnet. However, what I want to know is where do the rear bars typically go in the back of a coupe? I don't want to buy some spiffy looking RSD kit and then have to cut holes (read: RUIN) in it later especially one like the TopLine that is covered in vinyl.

 

[MyEarsHurt]

I dont know if they will fit together, I put a pic where my rollbar is in my vert. If I would have purchased a rear set delete kit I would have had to cut holes in it. I made mine with 1/8 mdf, a latch from home depot and a few sq feet of vinyl for like $15 total. Not to knock partshopper, but I wouldnt spend a whole lotta money on a rear seat delete kit...just my .02.

http://memimage.cardomain.net/member_images/4/web/484000-484999/484771_117_full.jpg

 

[Defleshed]

http://memimage.cardomain.net/member_images/4/web/484000-484999/484771_117_full.jpg

We are sorry, your request has caused an error. Please press back on your browser and try again.

 

[JayC]

http://www.nhra.com/2004/news/november/110102.html

This may help your decision. Please read the new 2005 rules.


Jay

 

[GT-03]

We are sorry, your request has caused an error. Please press back on your browser and try again.

Ditto. The link posted above seems to be bad.

Also, I know we are talking about a coupe, but the best roll bar for a convertible I found is from Outlaw Racecars.

 

[MyEarsHurt]

Strange, it works for me....heres the whole page...

http://www.sounddomain.com/memberpage/484771/2

 

[nickthegenius]

http://www.nhra.com/2004/news/november/110102.html

This may help your decision. Please read the new 2005 rules.


Jay

Thanks. Wasn't it previously 11.99 for the 6pt?