• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Running Rough :(

  • Thread starter Thread starter Pitch4pd
  • Start date Start date May 31, 2004

Pitch4pd

Founding Member
Jun 9, 2002
235
0
16
Allentown
May 31, 2004
#1
  • May 31, 2004
  • #1
Hey guys its been awhile since I had to post here (guess thats a good thing).
Well anyways yesterday I did the foglight rewire useing a relay and it worked I was excited, so buttoned everything up and parked the car for the day.

Today I go to pick up my girl and as soon as I backed out of my driveway and slipped the clutch in first it felt like a ton of bricks and made me feel like I was in for a long ride. It was running rough, like your in 5th gear trying to pull a semi up a hill rough. It felt like it didnt want to go anywhere. So I figured hey I had the batter disconnected for awhile yesterday and it is pooring rain today the computer just needs to learn. Well an hour and a half later I given up on the computer idea and I was back home with my girl.

Yada yada yada, I go to take her home 3-4 hours later I get in the car and go down the street and its a miracle it feels perfect. Me being the realist knew it wasnt for real, so I popped in fourth gear had the rpm's at 1K and said hello again to my rough running gremlin. An hour later im back here with minor wiplash and still shakeing from the nice rough ride.

So here is the real description, it either feels like an ignition problem (something dropping out) or like the whole thing is getting flooded. When I run it thru the rpms at a moderate rate it comes back to life around 2500 rpm's , than goes back to running like crap. So Im trying to think what it will be, tomorow I am going to pick up spark plugs since the engine is about 50,000 miles new (what should I gap them at , maybe at stock?) I have a set of motorsport wires lieing around (have motorsport wires on there now). Then from there I dont know, Ill list my mods below. Any ideas apreciated, Granite I work at a ford dealership I dont always like to bring my problems there (time = money) Thanks guys.

Charles
1990 GT
302 High CompressionLongblock by CCM B-303 Cam,Motorsport Double Roller Timing Chain,1.6 Motorsport Roller Rockers, Blaster 3 Coil,Satanic Underdrive pulleys,Smog eliminator,GT40P Upper/Lower intake,65mm TB,67mm EGR, 75mm Mass Air, Mac Fenderwall Induction,Mac Shorty headers,DynomaxHi Flo H-Pipe w/ Cats, Ram Clutch with P/P, 2.5" Dynomax Mufflers,Steeda Firewall adjuster,Tri-Ax shifter,Walbro 155lph pump.Pa Performance 160 Amp 3g Alternator.3.55 Rear Gears
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
482
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
M
Running rough
  • Mike3
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
316
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 1, 2026
Mike3
M
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
578
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
459
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?