• Mustang Forums
  • Special Production

Roush Saleen Idle Problem!

  • Thread starter Thread starter 01Saleen-465
  • Start date Start date Apr 9, 2005
0

01Saleen-465

New Member
Apr 9, 2005
46
0
0
Michigan
Apr 9, 2005
#1
  • Apr 9, 2005
  • #1
So here is the situation...........took the Saleen out yesterday for a spin and got on her pretty good while banging through a couple of gears. I came to a stop at the next light and the car's idle was jumping all over the place(300-1000 rpm). To make long story short, got home, popped the hood and there is a hissing sound coming from the back of the engine. I am almost positive it is coming from the base of the S/C. Also while I was under the hood I happend to notice that my radiator hose is almost sliced open from my S/C belt rubbing against it. Needless to say I am not very happy considering I have only had the car for 4 months(in storage for 3) and it only has 8K miles. Has anyone else had either of these problems? Any help or advice to fix these would be appreciated.
 
Y

Yoballs83

New Member
Apr 4, 2005
41
0
0
Northern NJ
Apr 10, 2005
#2
  • Apr 10, 2005
  • #2
Belt

As far as the belt goes, I had the same issue yesterday. Car was in the shop and I had them put on a new Saleen belt, and after about an hour of driving I just happened to pop the hood and see that it almost cut thru the whole thing. We replaced that piece with a hose from autozone, upper radiator hose for the stock GT and with a little cutting and twisting we were able to get another 1/4 inch clearance which was all she needed.

Don't know what to tell you about that hissing noise though
 
W

whosdady

New Member
Dec 6, 2004
107
0
0
Apr 10, 2005
#3
  • Apr 10, 2005
  • #3
There are 2 hoses on the back of the blower. (actually the plenum) It sounds like one of them has fallen off or is very loose.
 
H

HMSPORT

Banned
Mar 30, 2005
60
0
0
Apr 10, 2005
#4
  • Apr 10, 2005
  • #4
01Saleen-465

I assume you have a series II.
If you do, check the PLASCTIC intake elbow tract that bolts up to theback of the s/c. They are notorius for cracking! Saleen has an upgrade kit using the series IV intake tract which is aluminum and also flows more.
 
0

01Saleen-465

New Member
Apr 9, 2005
46
0
0
Michigan
Apr 10, 2005
#5
  • Apr 10, 2005
  • #5
I used a little trick today that somebody taught me to find the air leak. I took a small diameter hose and put up to my ear and ran the other end around some of the gasket areas. The hissing sound was magnified 10x when I ran over the leak with the hose. I can't see exactly where it is coming from, but it definatly coming from the base of the supercharger at the back of the engine. I am assuming that it is the gasket. Has anyone ever pulled off there supercharger and are there any tips or tricks to doing it? I will double check some of the above suggestions though before I tear it apart.
 

Acheron315

New Member
Oct 23, 2003
235
0
0
Charleston, SC
Apr 10, 2005
#6
  • Apr 10, 2005
  • #6
The supercharger head unit has been known to become loose from the lower intake. Check your bolts!

I had this happen and it affected idle very badly, the car would shut off at stop lights. It was also making a loud squeeling noise because the gasket was vibrating like a reed.

The gaskets are pretty heavy duty, but they can be damaged by being sucked in. Mine weren't.

As far as taking the head unit off, someone with little hands is very helpful. Some ratcheting box end wrenches are helpful too.

Just try and see if they are loose first. If they are, then retighten them and see if the noise goes away.

On a side note, how much does the series IV intake tract cost?
 
H

HMSPORT

Banned
Mar 30, 2005
60
0
0
Apr 11, 2005
#7
  • Apr 11, 2005
  • #7
I believe Saleen sell the series IV intake kit for $650.00. It comes with a buch of parts. You might check with haneymotorsport, they have some good prices on saleen parts.
 
0

01Saleen-465

New Member
Apr 9, 2005
46
0
0
Michigan
Apr 11, 2005
#8
  • Apr 11, 2005
  • #8
Thanks I wil be sure to check the bolts for tightness.
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
658
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
782
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
247
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
183
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
Hello from Washington State!
  • Daddys Lil Filly
  • Jun 10, 2026
  • The Welcome Wagon
Replies
5
Views
163
The Welcome Wagon Jun 10, 2026
Daddys Lil Filly
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?