Saleen Replica Kit

White360RFnSwee

Founding Member

Nov 4, 2002

869

0

0

West Palm Beach FL

Aug 11, 2004

#1

• Aug 11, 2004

• #1

How do I install it? I got my saleen replica kit recently painted.. everything is looking great but I have no idea how to install it.. it has no holes in it, etc etc..

Has anyone here gotten a saleen replica kit installed?

-Ryan

 

stallion98gt

New Member

May 12, 2003

1,802

0

0

Los Angeles, CA

Aug 11, 2004

#2

• Aug 11, 2004

• #2

how is the quality of the replica kit ? any pics ?

 

A

Auburn97GT

New Member

Aug 12, 2002

3

0

0

Detroit, Michigan

Aug 11, 2004

#3

• Aug 11, 2004

• #3

sounds like he bought a fiberglass kit

 

02mingreyGT

New Member

Jan 4, 2004

280

0

0

Portales, NM

Aug 12, 2004

#4

• Aug 12, 2004

• #4

I just got done installing my full authentic saleen kit and it was by no means easy. Getting everything lined up and drilled was a major PITA, i drilled alot of holes. I managed getting the front bumper and side skirts on but the side scoops and rear i had to take to a body shop for them to put on which im glad they did because it took 3 guys 10 hours of labor to finish.

 

R

Roger_4.6_96

Founding Member

Jul 16, 2002

1,209

0

0

Reno,NV

Aug 12, 2004

#5

• Aug 12, 2004

• #5

Your suppost to mount the bumpers to the car then take them to go get painted

Fiberglass does suck ballz . i got 2 saleen kits right now, 1 fiberglass other urethane. Im in process of putting urethane on with Borla side exhaust

 

nickthegenius

Active Member

Dec 23, 2002

1,631

1

38

Elwood, IN

Aug 12, 2004

#6

• Aug 12, 2004

• #6

and

 

M

MoNsTaMaCk24

Founding Member

Aug 12, 2002

742

0

0

Shippensburg, PA

Aug 12, 2004

#7

• Aug 12, 2004

• #7

Your ok... I am an auto body man! Take your time... Line everything up use vise grips and so forth try not to put vise grips on your paint... Take off your stock bumpers side skirts head lights and stuff... Give yourself plenty of room to work with... Pop rivets is what i used to put on side skirts along with 3m double sided tape and if the tape dont work corvette panel glue does the trick too! Good luck!

 

White360RFnSwee

Founding Member

Nov 4, 2002

869

0

0

West Palm Beach FL

Aug 12, 2004

#8

• Aug 12, 2004

• #8

Im just gonna take it to the body shop and have them install it.. I guess they'll figure out a way to get it put on!!

-Ryan

 

T

tarch

My 8V > 4V > 2V

Founding Member

Aug 20, 2002

3,073

1

56

Redmond, WA

Aug 12, 2004

#9

• Aug 12, 2004

• #9

White360RFnSwee said:

Im just gonna take it to the body shop and have them install it.. I guess they'll figure out a way to get it put on!!

-Ryan

Click to expand...

$$$!

 

02mingreyGT

New Member

Jan 4, 2004

280

0

0

Portales, NM

Aug 12, 2004

#10

• Aug 12, 2004

• #10

I bet it will take them just as long but it will look better trust me just be prepared for a large bill but you car will look perfect!

 

J

joestang98

New Member

Apr 18, 2004

187

0

0

Vienna,WV

Aug 12, 2004

#11

• Aug 12, 2004

• #11

PM me if you need Saleen engine bay plaques or consol plaque and bumper #'s

 

2Stock

New Member

Aug 1, 2004

37

0

0

NC

Aug 12, 2004

#12

• Aug 12, 2004

• #12

I would just take it to the body shop. When I got my steeda hood painted on my old stang, they had to blend in the panels so everything looked great. So to keep from messing anything up I left it to the pros.

 

BLK_ROUSH

Founding Member

Feb 5, 2000

1,300

0

36

Newnan, GA

Aug 12, 2004

#13

• Aug 12, 2004

• #13

White360RFnSwee said:

Im just gonna take it to the body shop and have them install it.. I guess they'll figure out a way to get it put on!!

-Ryan

Click to expand...

Not selling it?