• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Scanner wont read my computer...

  • Thread starter Thread starter bdog9seclx
  • Start date Start date Jan 7, 2006

bdog9seclx

New Member
Dec 22, 2005
113
0
0
atl
Jan 7, 2006
#1
  • Jan 7, 2006
  • #1
Went to autozone today to dump codes... I have a 2000 v6 body with a 302 and we plugged the scanner into a hookup on driverside like right behind radio and etc... we tried all years on the scanner but everytime it said cylinder id not recognized... well the person before me did the swap so i know little bout some detals like the comp is it a cobra yada yada yada... on the way home a light bulb came on in my head... MAYBE that was that the stock v6 computer? just left there unused and unplugged...cuz i do know in fox bodies they are behind the kick panel im gonna check tomm... any ideas?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 7, 2006
#2
  • Jan 7, 2006
  • #2
If he transplanted a 5.0 in there, with all its harnesses, he should have included the selt-test connector. on a stock 5.0 Fox, it is on the driver side near the wiper motor.

The original (to the car) port in the car is an OBD-II connector, which has a different number of pins than an OBD-I connector.

I would look for the engine-correct OBD-I self-test connector under the hood.

Good luck.
 

bdog9seclx

New Member
Dec 22, 2005
113
0
0
atl
Jan 7, 2006
#3
  • Jan 7, 2006
  • #3
can u find a pic or anything when it comes to electronics im lost.... we found one behind left of the radio area but i think its old comp sionce it wont come up on scannner ty
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 7, 2006
#4
  • Jan 7, 2006
  • #4
bdog9seclx said:
can u find a pic or anything when it comes to electronics im lost.... we found one behind left of the radio area but i think its old comp sionce it wont come up on scannner ty
Click to expand...
Here is the best I can think of off the top of my head. Others (like JRichker) will have better info.

The 5.0 test connector will be under the hood, unless the last owner did major wire modification and extension.

Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 7, 2006
#5
  • Jan 7, 2006
  • #5
Diagnostic connector views, Typical 86-93 Mustang


 

bdog9seclx

New Member
Dec 22, 2005
113
0
0
atl
Jan 7, 2006
#6
  • Jan 7, 2006
  • #6
Sweet chick out my link and let me know thks guys

www.orlandoworldwide.com/stang
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Jan 7, 2006
#7
  • Jan 7, 2006
  • #7
Holy crap that looks like one HALF ASSED setup. Go back with all those connectors and replace them with soldered and wrapped connectors. That is def. the diagn. and it is the ford obd1.
 

bdog9seclx

New Member
Dec 22, 2005
113
0
0
atl
Jan 7, 2006
#8
  • Jan 7, 2006
  • #8
10 4
 
You must log in or register to reply here.

Similar threads

My Cousin's Nova (the final stupid story)
  • CarMichael Angelo
  • Jul 22, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 23, 2011
'13_ImpactBlue_GT
where is the computer obd hookup on a v6 stang?
  • bdog9seclx
  • Jan 6, 2006
  • SN95 V6 Mustang Tech
Replies
1
Views
1K
SN95 V6 Mustang Tech Jan 7, 2006
Lsredy2kstang
B
Any suggestions: MY 88 cuts out at above 1800rpm.....
  • Bilt4speed408
  • Oct 5, 2007
  • Fox 5.0 Mustang Tech
Replies
5
Views
667
Fox 5.0 Mustang Tech Oct 6, 2007
Bilt4speed408
B
Help me create the "Surging Idle Checklist"
  • jrichker
  • Apr 10, 2005
  • Fox 5.0 Mustang Tech
  • 27 28 29
Replies
575
Views
452K
Fox 5.0 Mustang Tech May 18, 2024
CassieL
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?