• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

sensors effecting poor "hot start" condition?

  • Thread starter Thread starter jaymac
  • Start date Start date Sep 10, 2005
  • 1
  • 2
Next
1 of 2 Next Last

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 10, 2005
#1
  • Sep 10, 2005
  • #1
I replaced my ECT sensor awhile ago as I had a terrible hot starting problem, and the car would lope and sometimes die, and I had bad MPG. I was told to replace the ECT, and I did. Hard start problems went away, and I was able to get 19 mpg w/ city driving/short trips, 4.10's, 2800 stall. Not too bad.
However, not too long after, and currently, my hot start loping came back, not as bad, but it's back. Also, this last fill-up, I only pulled down 14.5 mpg. Still all city driving w/ short trips, but driving SUPER SLOW. A 5 MPG change is crap, especially w/ the gas the way it is now...
Anyway, could I have gotten a bad ECT sensor. It was from Autozone, but I don't know what brand. It was $15.
Are there any other sensors that would cause poor hot starts? My ECT didn't throw a code for my ECT last time, but it was definitely the culprit.
Any ideas, guys?
Thanks!
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Sep 10, 2005
#2
  • Sep 10, 2005
  • #2
subscribing.........

(similar problems, probably due more to my injectors though)
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 10, 2005
#3
  • Sep 10, 2005
  • #3
have you tried the ECT Chris? Why do you think it was your injectors?

Anyway, It was a WELLS brand that I got. I just fund the Motorcraft pice for $25. I'll prob. go for that one just for the heck of it, but I'd love to hear other people's ideas as to other possibilities. ACT maybe? IAT?
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Sep 10, 2005
#4
  • Sep 10, 2005
  • #4
Well people usually have problems with hot starts with 30lb injectors. I have never replaced my ECT, although I might try it. I'm gonna pull codes to see if there's anything wrong, cus something is up with the stang lately.
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 10, 2005
#5
  • Sep 10, 2005
  • #5
definitely pull codes, but keep in mind my ECT never threw a code.
I know bad TFI's can also cause poor hot starts but mine was recently replaced also...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 10, 2005
#6
  • Sep 10, 2005
  • #6
One can ohm out the ECT and ACT/IAT with a meter (they are both thermistors). Chris, for the SN's I look for the fan low speed to come on at 208*F. That suggests the ECT is at least in calibration for that temp range (which is an important one).

J, I dont recall your hot start issues exactly - does it crank but not catch? What Chris mentioned about flooring the gas pedal during cranking does help the 30# injector guys, but is worth trying for diagnostics-sake.

Have you yanked the ECT again to make sure it is not all crapped up? THey get a layer of corrosion and other junk on them.

Is the hot-start loping kind of like idle surge? My SD 88 has a tad of hot restart idle surge for about 30 seconds after starting. Once I drive with it in first for a few seconds, it straightens itself out.

Note also that if the battery has been disco'd recently, it can surge and hunt for awhile while it relearns.

My random thoughts.

Good luck bud.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 10, 2005
#7
  • Sep 10, 2005
  • #7
Chris - I can almost guarantee you that your hot start problems are from the 30's. Too many experience that (including me as you know) and in the timing of your problems it went right along with the installment of the 30's. I personally think 24's are the way to go. Seen to many overdone 30's like on mine. Good Luck!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 10, 2005
#8
  • Sep 10, 2005
  • #8
Chris just needs to keep playing with that magic handheld box he has.
 
J

Jeff7477

Founding Member
Jul 2, 2001
176
0
0
Lincoln, Nebraska USA
Sep 10, 2005
#9
  • Sep 10, 2005
  • #9
Why do 30's cause it?
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Sep 10, 2005
#10
  • Sep 10, 2005
  • #10
5spd GT said:
Chris - I can almost guarantee you that your hot start problems are from the 30's. Too many experience that (including me as you know) and in the timing of your problems it went right along with the installment of the 30's. I personally think 24's are the way to go. Seen to many overdone 30's like on mine. Good Luck!
Click to expand...

Yea, if I were to redo it, I'd probably stick with 24's. But hindsight is 20/20 huh?

HISSIN50 said:
Chris just needs to keep playing with that magic handheld box he has.
Click to expand...

lol, I got my wideband coming in sometime this week, maybe that will help. But I think there might be more issues than the tuning still. It seems the stang is getting slower and slower day by day. I need to hook up a vacuum gauge and make sure I have good vacuum and that I haven't missed anything.

Jeff7477 said:
Why do 30's cause it?
Click to expand...

I have no idea.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 10, 2005
#11
  • Sep 10, 2005
  • #11
30's "give off" to much cranking fuel upon initial start up from what I gather and understand. It is the only thing that makes sense. It is hard (when the cylinder is "heated" up) for the spark to catch all that fuel on fire (explode)

Oh yeah! The twEECer has the capability of taking that con from the 30's out...but N/A without a tune...24's on a 302 for sure IMO.
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 11, 2005
#12
  • Sep 11, 2005
  • #12
HISSIN50 said:
J, I dont recall your hot start issues exactly - does it crank but not catch?

Have you yanked the ECT again to make sure it is not all crapped up? THey get a layer of corrosion and other junk on them.

Is the hot-start loping kind of like idle surge?

Note also that if the battery has been disco'd recently, it can surge and hunt for awhile while it relearns.
Click to expand...
It is indeed the "hot-start loping kind of like idle surge." It used to be really bad, to the point of stalling. As soon as I replaced the ECT, I drive all day, cut it off, then crank it IMMEDIATELY, and it would fire right up and idle like a champ! Then after a few weeks I would guess, it started loping again. It's not as bad as before, but it's noticeable. I don't really care about the loping itself, as it goes away within 2-3 "lopes", but if it is indded a foul ECT, then it could be causing the drop in MPG I experienced between the last 2 tanks, and THAT I do NOT like
SO, "ohmin" it out - what would I be doing/loking for. I do have access to an ohmmeter, and someone who knows how to use it better than I do, so what's the procedure/#'s?
Thanks!

I will also yank it to make sure it's clean and the battery hasn't been disconnected in quite awhile now...
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 11, 2005
#13
  • Sep 11, 2005
  • #13
so I pulled and checkd it and there was a fair mount of sldge frm inside the cooling system, rust from inside the block, lines, etc., but wiped off easily enough w/ a paper towel. I cleaned some crap from inside the port, too. I let it run and reach 180*, then shut it down, waited 10 sec., then fired it back up. I fired to 1200 rpms, then dropped into normal 900ish idle. SO, it seems to have been a temp. fix, if nothing else. It'll still hae to stand the test of time, of course. Now about this ohmmeter reading...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 11, 2005
#14
  • Sep 11, 2005
  • #14
jaymac said:
Now about this ohmmeter reading...
Click to expand...
The values (courtesy of Jrichker) are here .
Good luck bud. (I might have an idea later but I just woke up).
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 11, 2005
#15
  • Sep 11, 2005
  • #15
HISSIN50 said:
(I might have an idea later but I just woke up).
Click to expand...
uhhh....what time did you wake up??
I went for a few more short trips and at worst, It fired up to 1300, loped once to 500 ish ( just a guess). then even out. Still not too bad, but I'm anal
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 11, 2005
#16
  • Sep 11, 2005
  • #16
To bed at 5:30 am and up at 11:30 am.
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Sep 11, 2005
#17
  • Sep 11, 2005
  • #17
graveyard shift or party animal?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 11, 2005
#18
  • Sep 11, 2005
  • #18
jaymac said:
graveyard shift or party animal?
Click to expand...
Insomnia.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 11, 2005
#19
  • Sep 11, 2005
  • #19
HISSIN50 said:
Insomnia.
Click to expand...
Too many worries...
 
P

Phatt_daddy

Member
Apr 22, 2005
219
1
19
Hytop, AL
Sep 11, 2005
#20
  • Sep 11, 2005
  • #20
This sounds alot like what mine is doing. Only mine is/ was flooding out until I replaced my map sensor. The car still has a tough time starting when I shut it off and try to restart it. Sometimes I have to let it sit until it cools bnack off.
When I turn the key it will spin like it is out of time but never fire off (btw I have timing set to like 12-14 btdc). I also still have a prob with gas fouling plugs when it does this. Sorry to just jump on the thread but I figured if they can help you why not kill two birds with one stone.

Nate
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

L
Electrical problems with passenger side downstream o2 sensor
  • Lexiii12
  • Sep 14, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
157
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2026
Lexiii12
L
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
702
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
516
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
538
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
1990 Mustang with no-start condition - Fixed and how-to
  • TTSaleen
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
200
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 22, 2026
TTSaleen
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?