• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Shorty Headers

  • Thread starter Thread starter asecretfile
  • Start date Start date Mar 13, 2007

asecretfile

New Member
Feb 11, 2007
228
0
0
Mar 13, 2007
#1
  • Mar 13, 2007
  • #1
Put new shorty headers on and at first the passenger side was leaking very loudly but the drivers side was silent...so after taking them off (passenger side) and putting them back on 3 times they've hushed up. Now its the drivers side...its not a loud leak but when I get on it is the only time I hear it. Sounds like its just hissing out of a corner. Put a stethescope on it and located exactly where it is coming from...first two screws from the front. Ive been snugging them down everyday...when its cold, when its hot. Ive seen other leaking header threads and remember ppl talking about using red rtv hi temp on it but seems as it was half and half as far as who agreed and disagreed about it being an effective fix

At first I thought the headers might be warped but they're arrow straight and airtite when I had them off and vacuum tested them

Thanks again
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Mar 13, 2007
#2
  • Mar 13, 2007
  • #2
forgot to mention...been using copper gaskets as well...if its any help

Thanks
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Mar 13, 2007
#3
  • Mar 13, 2007
  • #3
when I got copper gaskets with my mac headers had all kinds of problems, but thumper suggested some copper sealant and the felpro gaskets and low and behold the compressing of those gaskets works a heck of a lot better. No leaks whatso ever. Don't look as pretty as the copper ones, but work better
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Mar 13, 2007
#4
  • Mar 13, 2007
  • #4
what kind of headers are these??? I run frpp headers with generic gaskets, and have removed them and installed them more than once and have never had a single leak.

as for bolts, get some stage 8 locking header bolts to keep them from loosening on you...

if you're having this many problems, it's the headers.
 
You must log in or register to reply here.

Similar threads

R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
509
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
Engine New Oil Leak Help.
  • Slo5Oh89
  • Mar 14, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
746
Fox 5.0 Mustang Tech Mar 19, 2025
Slo5Oh89
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?