show me your tail pipes!

inphiniti · Nov 15, 2009

well after over a year w/ dumps and finally the past 4 months w/ cam + dumps im absolutely sick of the drone in the car and also sick of the smell that lingers onto clothes lol...

trying to get an idea, especially with 315s outback. not sure on tail pipes either. i'd like to get a tip that is sort of angled, maybe 3in tip w/ 2.5 in piping since my Stingers are 2.5 in/out

so, show me your tail pipe set ups!!!

toyman · Nov 15, 2009

inphiniti said:
well after over a year w/ dumps and finally the past 4 months w/ cam + dumps im absolutely sick of the drone in the car and also sick of the smell that lingers onto clothes lol...

trying to get an idea, especially with 315s outback. not sure on tail pipes either. i'd like to get a tip that is sort of angled, maybe 3in tip w/ 2.5 in piping since my Stingers are 2.5 in/out

so, show me your tail pipe set ups!!!

Back and side view of 3" stainless tips.

Tire size is 255/45r17

revhead347 · Nov 16, 2009

I never believed in tail pipes, and I run dumps. If you really want to get rid of the drone, put a better quality muffler on the car, like a Magnaflow or an Ultraflow. That will take care of the drone, but not the fumes unfortunately. If you want tailpipes, I recommend the Mac tailpipes, because they have an extra ball and socket in them. That way you can take the exhaust back apart later on if you want to without cutting it an rewelding it.

Kurt

Adam95GT · Nov 16, 2009

Use fox tails they fit the sn95 body perfectly

inphiniti · Nov 16, 2009

i think im going to end up having a shop build the pipe from the muffler to the tip. just not sure what tip im going to run, was just trying to see some tips that everyone is running. wasnt sure if they run them straight out or sort of contoured w/ the bumper

revhead347 · Nov 17, 2009

Keep in mind, if you order prefab tail pipes, you can get them with nice clean mandrel bends. Anything the shop is going to make is going to have a bunch of tight bends in it.

Kurt

inphiniti · Nov 18, 2009

Adam95GT said:
Use fox tails they fit the sn95 body perfectly

is that what you have?

ProKiller · Nov 18, 2009

this is the MAC catback.

nmcgrawj · Nov 18, 2009

revhead347 said:
I never believed in tail pipes, and I run dumps. If you really want to get rid of the drone, put a better quality muffler on the car, like a Magnaflow or an Ultraflow. That will take care of the drone, but not the fumes unfortunately. If you want tailpipes, I recommend the Mac tailpipes, because they have an extra ball and socket in them. That way you can take the exhaust back apart later on if you want to without cutting it an rewelding it.

Kurt

Kurt i've heard from guys with magnaflows and ultraflows who have a drone problem. Might not be as harsh as flows, or at the same RPM (thus it seems like there is no drone) but its still there. The only way i've seen to truly have none with aftermarket mufflers is to T into the tail pipes or run corsa mufflers.

Then again, its all from your perspective. Drone to you might be nothing to me and vice versa.

revhead347 · Nov 18, 2009

You might be right, but I used to have 2 chamber flowmasters. Those drone so bad anything is a drastic improvement.

Kurt

inphiniti · Nov 18, 2009

ProKiller said:
this is the MAC catback.

ive said it before but i love ur car!!! what size tires are u running out back? i dont remember what youve posted in other threads of size... if 315, how is the clearance of the pipe/tire? thats going to be my main concern for when i do this

those are the exact style tips i want, they go with the buddy lines VERY well and are very subtle..

as far as drone i can definitely say these borla stingers drone alot at low RPMs... i wont get rid of them, id just like to put pipes back on to quiet it somewhat down.

anyone else with pics of their tail pipe tips set up? if so lemme no what tips ur running!! looking to get ideas for 3in

thanks to everyone whos posted so far!!

95opal · Nov 19, 2009

View attachment 238842

ProKiller · Nov 19, 2009

the top pic with the FR500s is with 305/35-18 MT ET street IIs. The bottom pic is only with 275-17s. obviously didn't have any problems with the 17s. The 18s are tight but i have no rubbing. I think the closest i am is about 1/2" on the driver's side from the brake line.

Nik_95Cobra · Nov 19, 2009

315's and Bassanis...Lost all the good pics of it when mustangmods.com got all messed up and I couldn't get to my pics anymore that used to be hosted there.

COBRA90GT · Nov 20, 2009

Magnapack catback tips during installation:

inphiniti · Nov 20, 2009

Nik, any rub on those 315s?

COBRA90GT, what size tips are those?

COBRA90GT · Nov 20, 2009

inphiniti said:
COBRA90GT, what size tips are those?

Exhaust tip size is 3.5" - FWIW p/n of this "Magnapack" catback is 15677.

cbarr300 · Nov 26, 2009

Welp, I've been gone for a while, hopefully everyone's been well. The Marine Corps has been keeping me busy, lol. Most have seen this pic 100 times...but there's some new people. Just an idea...It's a Borla catback w/ perforated stainless steel welded around it...

View attachment 238159

Nik_95Cobra · Nov 27, 2009

inphiniti said:
Nik, any rub on those 315s?

No rub...I run a thin wheel spacer, of which I can't remember the size of since I bought them so many years ago. Tail-pipes are adjusted slightly to clear the tires. No interference with the quad-shock or anything else.

show me your tail pipes!

inphiniti

Active Member

toyman

revhead347

Apparently my ex-husband made that mistake.

Adam95GT

New Member

inphiniti

Active Member

revhead347

Apparently my ex-husband made that mistake.

inphiniti

Active Member

ProKiller

nmcgrawj

Advanced Member

revhead347

Apparently my ex-husband made that mistake.

inphiniti

Active Member

95opal

ProKiller

Nik_95Cobra

COBRA90GT

Mustang Master

inphiniti

Active Member

COBRA90GT

Mustang Master

cbarr300

Member

Nik_95Cobra

Similar threads

show me your tail pipes!

Active Member

Apparently my ex-husband made that mistake.

New Member

Active Member

Apparently my ex-husband made that mistake.

Active Member

Advanced Member

Apparently my ex-husband made that mistake.

Active Member

Mustang Master

Active Member

Mustang Master

Member

Similar threads

Privacy & Transparency

Privacy & Transparency