• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Snow Performance Methanol Injection Boost Cooler

  • Thread starter Thread starter 94TURBO5 O
  • Start date Start date Oct 17, 2004

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 17, 2004
#1
  • Oct 17, 2004
  • #1
I've been getting a lot of PMs about the Snow kit and how I mounted it.
It's simple to install and should take like 2 hours to do.

1. I mounted the tank in the corner and drilled a 1/4" hole for the hose to go through to the pump.



2. I took off the wheel and peeled back the wheel well plastic. and mounted the pump directly under where the tank is (under the frame rail)



(the white hose is going to run into the pump it leads to the bottom of the resivoir tank above and the black wire is the ground)

3. I then used a 1/4" NPT Tap to drill a hole for the nozzle and then screwed it in gently. I added some loc-tite to the inner theads.




4.This is where I mounted the Variable Controller. It's very attractive piece of the Stage II system, there are only 2 wires that come from the pump, (+/-) the (+) will hook into my Variable Contoller.



This is where I mounted the LED's
The Green one is for when the kit is spraying.



The Red one is the methanol low level indicator.








Call Matt @ Snow Performance b/c this kit rocks! He's very helpful and you can visit the site Snow Performance
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Oct 17, 2004
#2
  • Oct 17, 2004
  • #2
What exactly does it inject into your engine? I never heard of or seen one of thoes before.
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 17, 2004
#3
  • Oct 17, 2004
  • #3
Methanol.
www.snowperformance.net
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
Oct 17, 2004
#4
  • Oct 17, 2004
  • #4
I just read the whole article on it in the 5.0 mag. It picked up alot of torque. Let me know what you run with it.

Dustin
 

BlueOvalStangGT

Active Member
Oct 27, 2003
2,849
0
46
Tampa Florida....USF!!!
Oct 17, 2004
#5
  • Oct 17, 2004
  • #5
Alot of people around here use those to inject de-natured alcohol around here. What do you think about that
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 17, 2004
#6
  • Oct 17, 2004
  • #6
You can use methanol, alcohol or winshield washer fluid. Nitro Booster is the bomb from what I hear and it's available @ Snow.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Oct 17, 2004
#7
  • Oct 17, 2004
  • #7
I can't wait till I have disposable income... screw grad school. I'm taking bets to see how long JR can go without either figuring out how to chrome it or paint it color shift. I'm saying maximum 2 weeks, then another week for him to take 75 pictures of his engine bay and post them.
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
Oct 17, 2004
#8
  • Oct 17, 2004
  • #8
^
What he said

Have you dyno'd with the methenol. Just curious, what does it exactly do. Would you need a different tune if you switched from methenol to windshield washer fluid.
 

4Jenna

Founding Member
Sep 12, 2001
4,326
6
69
AZ
Oct 17, 2004
#9
  • Oct 17, 2004
  • #9
subscribing
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 17, 2004
#10
  • Oct 17, 2004
  • #10
This should answer your question here:
http://www.musclemustangfastfords.com/tech/0407mm_snow/
 

rustang94

Member
Dec 2, 2003
281
0
16
Milwaukee WI.
Oct 18, 2004
#11
  • Oct 18, 2004
  • #11
Are there any dyno numbers on a n/a motor with the snow kit on it?
 

RydeOn

Licensed to Chill
Founding Member
Sep 26, 2000
6,273
1
77
orange county, CA
Oct 19, 2004
#12
  • Oct 19, 2004
  • #12
You can use water too!
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 29, 2004
#13
  • Oct 29, 2004
  • #13
This is where I mounted the VC and it looks very nice in the blue box. I just added it ttt in the my install pics.
 

Dan95-5.0

Active Member
Jun 14, 2003
1,110
0
36
Manitoba, Canada
Oct 29, 2004
#14
  • Oct 29, 2004
  • #14
really cool. when do you plan on going to the dyno to see what new numbers your going to get?

does that mean using a methanol injection, you dont really have to retard timing as the boost comes in?
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 29, 2004
#15
  • Oct 29, 2004
  • #15
I'm not sure yet, I'm still tuning. You are able to run more timing in boost though.
 
You must log in or register to reply here.

Similar threads

M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
76
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
485
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
M
2001 v6 heater return pipe leak question
  • mnky99
  • Nov 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
222
SN95 V6 Mustang Tech Nov 11, 2025
mnky99
M
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
714
1965 - 1973 Classic Mustangs -General/Talk- Saturday at 9:06 AM
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?