Spark plug install help

[JHRide00]

Hey guys,
Well i'm the new guy to changing spark plugs. I was wondering if you guys had any suggestions on how to do this properly or if you could point me to some literature on this. I was just wondering what i'm getting myself into before i start tomorrow. Please help!

Thanks,
John

 

[KaPPaBaLL]

Make sure you use very little bit of anti-seize on the new plug and DO NOT cross thread it in the head. Hand tighten really good. Don't want it to shoot out and strip the threads. and take your time. Fuel rails do not need to be removed.

 

[JHRide00]

Thanks so much. I was worried about the fuel rail. should i torque it down just a tad with a wrench? Is there one that is hard to get to? I don't want to start and then get stuck have way through the project. I mean it's just changing spark plugs.

thanks again,
john

 

[MT1083]

http://www.bullittarchive.com/Maintenance/Spark_Plugs/

Heres a site that should give you a little help.

 

[Rocketman]

Let the engine cool off before you start.

 

[GTvert01]

Let the engine cool off before you start

I knew I was forgetting something

It's a pretty easy job.took me about 20 minutes the first time.None are real hard to reach.The passenger side is slightly harder when you get near the firewall.