Spark Plug Wire Holders

94GTLaserRC · Oct 26, 2008

Awhile back someone posted a picture (and link for purchase) of one of those spark plug wire holders that bolt to the valve covers and sort the wires so they look nice. Does anyone have the thread, link, etc?

Also, If anyone else has pics or suggestions for wire separator clips, you can shoot them my way. Ive done the wire tie separators, but I want something little more "show-ready"

Thanks
RC

StadEMS3 · Oct 26, 2008

I made my own useing wire a little thicker than a coat hanger. bend one around the vavle cover bolt and then bent it up 90*. I drilled two small holes in the wire loom and attached it to the wire with small zip-ties. The wire was cut to size for each loom. Looks great & free... excuse the little bit of dirt...

View attachment 294987
View attachment 294989

earleys94gt · Oct 26, 2008

I think I know which one's your talking about RC, but I don't remember the thread. The were billett weren't they? I think BlackVert had them, from ?&? Engineering. I think I know the ones you mean and it's so frustrating I can't think of the thread.

94GTLaserRC · Oct 27, 2008

earleys94gt said:
I think I know which one's your talking about RC, but I don't remember the thread. The were billett weren't they? I think BlackVert had them, from ?&? Engineering. I think I know the ones you mean and it's so frustrating I can't think of the thread.

They bolted to the VC's and came up at the right angle to make the wires look almost PERFECTLY placed in there. Im sure the pictures will pop up here soon.
RC

Yellow302 · Oct 27, 2008

i know what your talking about, i think i have the pics saved on my laptop...

its this R&M Specialties 1101-90-P - R&M Billet Wire Looms - summitracing.com

only its chrome... still looking for it...

94GTLaserRC · Oct 28, 2008

Yellow302 said:
i know what your talking about, i think i have the pics saved on my laptop...

its this R&M Specialties 1101-90-P - R&M Billet Wire Looms - summitracing.com

only its chrome... still looking for it...

Those are not the EXACT ones Im thinking of, although I do believe they were from SUMMIT also.

I thought the ones I remember group the wires parallel to the ground instead of perpendicular.

I can use your link though to search a little more.

Thanks
RC

legalize420 · Oct 28, 2008

94GTLaserRC said:
Those are not the EXACT ones Im thinking of, although I do believe they were from SUMMIT also.

I thought the ones I remember group the wires parallel to the ground instead of perpendicular.

I can use your link though to search a little more.

Thanks
RC

the ones pictured in the link are vertical. they have them available in horizontal also.

BlackVert · Oct 29, 2008

probably these ...

R&M Specialties 1105P

they are the ones i have:

earleys94gt · Oct 29, 2008

Those were the ones I was talking about. Not sure if those are the ones RC wants.

Thanks for posting the pic BlackVert. Motor looks killer.

94GTLaserRC · Oct 29, 2008

In my mind I was NOT picturing these, but now that I see them that may be what I was thinking of. Maybe I had just seen a different angle
RC

desertcox05 · Oct 30, 2008

seems like i've seen some before made from machined alunmium and the wires were hid under them but i don't remember where

95Vert · Oct 30, 2008

BlackVert said:
probably these ...

R&M Specialties 1105P

they are the ones i have:

Any close up pictures of how they're mounted?

Thanks

BlackVert · Oct 30, 2008

earleys94gt said:
Those were the ones I was talking about. Not sure if those are the ones RC wants.

Thanks for posting the pic BlackVert. Motor looks killer.

thanks!

94GTLaserRC said:
In my mind I was NOT picturing these, but now that I see them that may be what I was thinking of. Maybe I had just seen a different angle
RC

it seemed like you were referring to mine, because you said there were pics and the guy had a set for sale. and i did have an extra set for sale about a year ago

95Vert said:
Any close up pictures of how they're mounted?
no, not at this time, sorry. i'll see if i have any other pics from different angles though. it's very straight forward though, the tabs line up with the front valve cover bolt holes
Thanks

95Vert · Oct 30, 2008

Not sure if you were asking me Chris, but I was asking if you could post some close up pics.

Thanks

StadEMS3 · Oct 30, 2008

BlackVert said:
probably these ... R&M Specialties 1105P

Those are sweet, got them in my Summit wish list. Now, sorry to vear from subject, but what plug wires do you recomend with those. I'm tired of getting pre-made FRPP's or whatever and they are way to long and the coil wire never fits our cars.

Labora · Oct 30, 2008

Looks cool might have to order a set, do they clear the driver side AC lines fine??

Spark Plug Wire Holders

94GTLaserRC

Squint as you approach, lest you be blinded by my

StadEMS3

Attachments

earleys94gt

Active Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

Yellow302

Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

legalize420

Active Member

BlackVert

Attachments

earleys94gt

Active Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

desertcox05

New Member

95Vert

New Member

Attachments

BlackVert

95Vert

New Member

StadEMS3

Labora

Similar threads

Spark Plug Wire Holders

Squint as you approach, lest you be blinded by my

Attachments

Active Member

Squint as you approach, lest you be blinded by my

Member

Squint as you approach, lest you be blinded by my

Active Member

Attachments

Active Member

Squint as you approach, lest you be blinded by my

New Member

New Member

Attachments

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency