• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Spring isolators/bushings

  • Thread starter Thread starter 92lxaz
  • Start date Start date Aug 11, 2006
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 11, 2006
#1
  • Aug 11, 2006
  • #1
I'm getting ready to put in my FMS C springs and most likely should replace the stock isolators all around. But I don't want it to affect the lowering too much as I know some aftermarkets are beefier so to speak. Any suggestions on a brand that is closer to stock and where I might get them? I saw a couple on Jegs from Gripp and Energy Suspension...any opinions?
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Aug 11, 2006
#2
  • Aug 11, 2006
  • #2
i put the B springs in mine and i had to go back and take out the rear isolators because it wasnt much of a drop.

my stock isolators were just fine for the new springs too, so there is a chance yours are fine. I had like 90K on it when i changed em.

heres what i mean.

this is right after install....they never "settled", and all isolators are in there.

View attachment 449179

this is just recently when i put these wheels on and took out the isolators out back...lowered it just a tad and it looks a bit better

View attachment 449181
View attachment 449183
 
9

92lxaz

Member
Jul 15, 2006
44
0
6
Chandler, Az.
Aug 11, 2006
#3
  • Aug 11, 2006
  • #3
Ok good. I only have 58K miles so mine should definitely be ok. Thanks for the pics, looks good. Does it affect the ride or noise much with the isolators out?
 
D

dwhiskie

New Member
Sep 18, 2004
183
0
0
Aug 11, 2006
#4
  • Aug 11, 2006
  • #4
92lxaz said:
Ok good. I only have 58K miles so mine should definitely be ok. Thanks for the pics, looks good. Does it affect the ride or noise much with the isolators out?
Click to expand...

I`m curious about this too. I want mine to be about .5" lower in the back.
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Aug 11, 2006
#5
  • Aug 11, 2006
  • #5
not that i can tell. my front A-arms make noise due to the fact that i didnt replace the bushings while i was in there....DO THAT. the rear seems quiet. I do still have isolators up front
 
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
Fox Alignment Suggestions
  • PonyGTrider
  • Jul 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
638
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2025
PonyGTrider
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
F
For Sale 03 Redfire Cobra Convertible
  • FastFox5oh
  • Jul 14, 2026
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
305
SN95 Mustangs For Sale (1994-04) Jul 14, 2026
FastFox5oh
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?