North East SSoM Members!!!

whitehorseupnorth · Oct 20, 2003

I just wanted to let you all know I have moved into my new house. There's plenty of room here for the stangs and stuff. I also wanted to let you guys know that the shirts and hats are being done up and should be done in a week or so. They really aren't expensive at all. I'll let you guys know when I have them and you guys can come see the house and get your stuff. Later, Chris

SSoM

gaslight · Oct 20, 2003

its real nice having your own place, isn't it?

FEARNO1 · Oct 20, 2003

Congrats on the house.....that should be one huge weight off your mind. Now I know where I can do a KB swap...or something

Venom351R · Oct 20, 2003

Hey Chris glad to see your all moved in, now we have to figure out how far u are fom me, prob not to far at all, Im starting to move all my stuff this weds and thurs, I'll prob call out tomorow too just to get a jump start on things.

Dan_Soprano · Oct 21, 2003

Congrats Bro!!! I guess i have to wait till February to see it!!
~DAN~

DoubleONegative · Oct 22, 2003

good to hear man !!!! now i know where i can install my steeda springs, FR500 cat back, U/d Pullies, Tri-Ax, and C&L MAF hehe.

my wife just finished moving into our new place as well i am still pissed about not having a garage though.

Where is your new house???? My wife and i moved out into the country somewhere out towards durham wherever the hell that is. So once again i don't know where i live just like last deployment.

-Mike

FEARNO1 · Oct 22, 2003

DoubleONegative said:
My wife and i moved out into the country somewhere out towards durham wherever the hell that is. So once again i don't know where i live just like last deployment.

-Mike

Maybe shes trying to tell you something

Mr No Stang · Oct 22, 2003

That's just cold Fred. Well, while we are on a moving kick, I am moving back into the apt. with Katie on Thursday. Congrats Chris to you and your wife, I cant wait to have you put on all those parts for me for free . Fred is just bluffing about the KB, no way he would do something like that......right?

-Mike

whitehorseupnorth · Oct 22, 2003

I moved to Gorham. I really like it out here. I have about 4 acres, so threre's plenty of room to moved around. I don't mind installing parts, but free??? I have a mortage to pay now, LOL. No seriously, I'll give you a members discount..

SSoM

Dan_Soprano · Oct 23, 2003

whitehorseupnorth said:
I moved to Gorham. I really like it out here. I have about 4 acres, so threre's plenty of room to moved around. I don't mind installing parts, but free??? I have a mortage to pay now, LOL. No seriously, I'll give you a members discount..

SSoM

so how much would your "help" with a kenne bell install be?

Dan_Soprano · Oct 23, 2003

FEARNO1 said:
Maybe shes trying to tell you something

Venom351R · Oct 23, 2003

DoubleONegative said:
My wife and i moved out into the country somewhere out towards durham wherever the hell that is.
-Mike

Its between Freeport and Brunswick, closer to Freeport. I used to live in Durham before I moved to Portland.

Chris I really like your new place, looks nice and cozy, we'll have to have some Rageing Kegers this summer

Its cool that your not going to be to far from me once I get officially moved in, you will have to stop by once I get all moved in.

whitehorseupnorth · Oct 23, 2003

Hey, thanks Travis. We will definately have some parties in the summer and cookouts. Well, Dan it will depend on how much of my "help" is needed. It wouldn't be anywhere close to what a gararge would charge you. I'am not sure how involved it will be. Hmm, lets see average install times are what 8-10 hours. Normal mom and pop shop $45 an hour (which is cheap) your looking at I would say an install at best would be $400- $500 dollars. Probabaly be close to $600 or more once they tach on the extras like little parts, chemicals and any waste removal fees. If I did the job totally myself, you could be looking at $250 only as a club memeber. A non- memeber would be close to $400. Which is cheap in my book to get a $2-3K part installed. Of course you must remember, do you have all the tools to install it? I doubt your 100 piece craftsman tool set would get the job done . These numbers are guesses at this point, they could change depending how involved it gets. Either way I'll take care of you.

DoubleONegative · Oct 23, 2003

FEARNO1 said:
Maybe shes trying to tell you something

thats fine with me!!! as long as she agrees to take that damn dog with her

FEARNO1 · Oct 23, 2003

Badstang00 said:
That's just cold Fred. Well, while we are on a moving kick, I am moving back into the apt. with Katie on Thursday. Congrats Chris to you and your wife, I cant wait to have you put on all those parts for me for free . Fred is just bluffing about the KB, no way he would do something like that......right?

-Mike

Youre just upset I beat you to it...Ya never know whats on the agenda for the winter. Then comes spring...flowers blooming,birds singing,KB whistling.....

Dan_Soprano · Oct 24, 2003

whitehorseupnorth said:
Hey, thanks Travis. We will definately have some parties in the summer and cookouts. Well, Dan it will depend on how much of my "help" is needed. It wouldn't be anywhere close to what a gararge would charge you. I'am not sure how involved it will be. Hmm, lets see average install times are what 8-10 hours. Normal mom and pop shop $45 an hour (which is cheap) your looking at I would say an install at best would be $400- $500 dollars. Probabaly be close to $600 or more once they tach on the extras like little parts, chemicals and any waste removal fees. If I did the job totally myself, you could be looking at $250 only as a club memeber. A non- memeber would be close to $400. Which is cheap in my book to get a $2-3K part installed. Of course you must remember, do you have all the tools to install it? I doubt your 100 piece craftsman tool set would get the job done . These numbers are guesses at this point, they could change depending how involved it gets. Either way I'll take care of you.

Chris, I am looking to do as much of the install myself as i can. Just getting the place and the tools is the hard part. I could do it in Jersey at my dads house, but being an old timer hardcore chevy guy i would have to listen to his ****. Oh well thats the price i pay for being the ford outkast in the fam. :OT: . Anyways......i get back in the begining of february. the car is down in jersey at my dads house. i don't plan on bringing it back up till mid-end of march (weather is still too crazy!!!) But as long as I have it on for april and the bonney eagle show i'll be happy. Oh yeah and i still need to buy the damn thing!!!! Ok enough rambling.
~DAN~

DoubleONegative · Oct 24, 2003

speakin of messed up weather it snowed in Brunswick yesterday

Sunday River got 3 inches

Venom351R · Oct 24, 2003

Since were talking about Moving heres a few pics of my place.

Venom351R · Oct 24, 2003

few more. All be all moved in by oct 31st, and its even got a garage for the stang

Dan_Soprano · Oct 24, 2003

DoubleONegative said:
speakin of messed up weather it snowed in Brunswick yesterday

Sunday River got 3 inches

that sucks.......it was 80 and sunny here in Sigonella yesterday....

North East SSoM Members!!!

whitehorseupnorth

SSoM President

gaslight

FEARNO1

Venom351R

Dan_Soprano

DoubleONegative

Active Member

FEARNO1

Mr No Stang

whitehorseupnorth

SSoM President

Dan_Soprano

Dan_Soprano

Venom351R

whitehorseupnorth

SSoM President

DoubleONegative

Active Member

FEARNO1

Dan_Soprano

DoubleONegative

Active Member

Venom351R

Venom351R

Dan_Soprano

Similar threads

North East SSoM Members!!!

SSoM President

Active Member

SSoM President

SSoM President

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency