North East SSoM Members!!!

Venom351R · Sep 12, 2007

DoubleONegative said:
^^^ ****in right doggie!

All going in tomorrow, Weld Pro Stars came today

DoubleONegative said:
oh noes trav!!
http://sports.espn.go.com/nfl/news/story?id=3014677

i honestly don't see the big deal...if you're not cheatin you aren't trying hard enough !

They all do it, they just got caught.

DoubleONegative · Sep 12, 2007

Redline_351R said:
All going in tomorrow, Weld Pro Stars came today

.

light aren't they???

Both rear prostars weigh less than one of my FR500s LOL

Venom351R · Sep 12, 2007

yah no $hit I picked up the box and one of the Cobra R's weighs more then both of the welds

gaslight · Sep 13, 2007

SWEET.
Remind me why you and Worden had to go with longer wheel studs or nuts. Do you need to use washers to prevent messing up the wheels with the nuts?
I have a very important pkg showing up today. Not going to tell you what it is until its up and running properly.

DoubleONegative · Sep 13, 2007

gaslight said:
SWEET.
Remind me why you and Worden had to go with longer wheel studs or nuts. Do you need to use washers to prevent messing up the wheels with the nuts?

Yes you need to run washers...the long shank lug nuts come with them infact

i am currently waiting for my 3inch ARP Studs to arrive...Mostly need them for strength...another reason is because i am using a spacer up front for the skinnies and the Prostars of pretty think in the center section

Venom351R · Sep 13, 2007

come on bryan what are you getting?

The car feels awesome with the 3.73's that was something it was deff lacking. Shipped the MT ET streets back to Mustangs Unlimited so hopefully I'll have the right size ones by mid week.

DoubleONegative · Sep 13, 2007

^^^ 26x10.5 for 15x8 prostars

Do yourself a favor and get the good ones....the bias ply ones!

cold96snake · Sep 14, 2007

Bumped into Shaw in Rockland today. His computer's tit's up again.

Yeah, Brian, out with it. I'm guessing something to straighten out your tuning issues.

cold96snake · Sep 14, 2007

DoubleONegative said:
^^^ 26x10.5 for 15x8 prostars

Do yourself a favor and get the good ones....the bias ply ones!

I don't believe you have informed me of how Tina's test came out.

DoubleONegative · Sep 14, 2007

cold96snake said:
I don't believe you have informed me of how Tina's test came out.

all we know is that the tumor is benign and it's .221CM in length, .19CM in width

cold96snake · Sep 14, 2007

DoubleONegative said:
all we know is that the tumor is benign and it's .221CM in length, .19CM in width

I'm glad to hear it's benign. My niece, the one that made me an uncle at age 10, just had brain surgery. They cut out 90% of the tumor. She's awake, knows her name, location. She's okay.

So, hang in there. Miracles happen everyday.

Venom351R · Sep 14, 2007

Mike must be into some pretty hard core **** for it to KO his computer twice in a short period of time.

Venom351R · Sep 14, 2007

DoubleONegative said:
^^^ 26x10.5 for 15x8 prostars

Do yourself a favor and get the good ones....the bias ply ones!

I got the 275/50/15 not sure if they are bias ply or not. Its whatever is on the MU site.

DoubleONegative · Sep 14, 2007

Redline_351R said:
I got the 275/50/15 not sure if they are bias ply or not. Its whatever is on the MU site.

nope those are the ones that look similar to nittos...mine are as close to slicks as it gets lol

Venom351R · Sep 15, 2007

DoubleONegative said:
nope those are the ones that look similar to nittos...mine are as close to slicks as it gets lol

are those the ones you have to run tubes in? I should be able to cut 1.8's 1.7's with these. Ive done 1.9's on Nittos before.

DoubleONegative · Sep 15, 2007

Redline_351R said:
are those the ones you have to run tubes in? I should be able to cut 1.8's 1.7's with these. Ive done 1.9's on Nittos before.

They say you are to run tubes...but nobody does.

When the sidewall wrinkles on the hit the tubes tend to get pinched and subsequently tear.

So most everyone runs them without tubes

gaslight · Sep 15, 2007

Not telling

Man I have a bad headache today. Tried to lay down for a while but that didn't do any good. Have had headaches all week. Mostly the sinus area around the eyes and a little on the side of my head near the eyes. Just wondering if I have a sinus infection or if its just seriously irritated from the dry weather lately. Hope this crap ends real soon.
Worden I think you should break out the drill and start putting some holes in those new rims. Instal some screws to hold those tires to the rims .

Venom351R · Sep 15, 2007

Stop snorting so much coke

BadVoodoo · Sep 16, 2007

Well, my computer is fixed, again. It should be alright now(knock on wood). I will never bring my computer to Circuit City(Firedog) again, or buy anything there either. They charged me $130 to fix my computer the first time, and it crashed 4 days later. I brought it back in, and after it sat there for 5 days. They did not return any of our phone calls, keep us up to date, and are impossible to reach by phone. Katie and I went in to talk to them, and they said it had a bad hard drive We grabbed the computer after being frustrated by the service they gave us, and got a second opinion elsewhere. It turns out that the computer is fine. We then went back to Circuit City to try and get a refund of the $130, as we felt that the never resolved the problem. The manager said that because the work was already done, he could do nothing for us. I am going to put a stop payment on my Visa card, as well as boycotting those guys for life.

Other than that, Katie is due in less than a month. Later guys

Venom351R · Sep 16, 2007

SCREW THEM!!!!!!!!

Patriots going to kick some ass tonight

North East SSoM Members!!!

Venom351R

DoubleONegative

Active Member

Venom351R

gaslight

DoubleONegative

Active Member

Venom351R

DoubleONegative

Active Member

cold96snake

cold96snake

DoubleONegative

Active Member

cold96snake

Venom351R

Venom351R

DoubleONegative

Active Member

Venom351R

DoubleONegative

Active Member

gaslight

Venom351R

BadVoodoo

Venom351R

Similar threads

North East SSoM Members!!!

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency