• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Stang wont idle

  • Thread starter Thread starter lockw33d
  • Start date Start date Jun 22, 2005

lockw33d

New Member
May 10, 2005
64
0
0
Jun 22, 2005
#1
  • Jun 22, 2005
  • #1
My 00 Stang will crank up and cut off. The only way it will stay running is if i keep giving it gas. Any input. Is this that damn IAC sensor i hear everyone screaming about. Thanks
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 22, 2005
#2
  • Jun 22, 2005
  • #2
Clean MAF, clean or replace IAC. Reset PCM after the previous. Hopefully that will correct the situation.
 

lockw33d

New Member
May 10, 2005
64
0
0
Jun 22, 2005
#3
  • Jun 22, 2005
  • #3
How do i clean the MAF, and IAC
 
S

SigmaPride

New Member
Mar 31, 2005
170
0
0
Jun 22, 2005
#4
  • Jun 22, 2005
  • #4
If it runs fine and just won't idle then IAC is your culprit most likely. I replaced mine around 80k.

I would buy a new one and slap it on. You could take it off first and try cleaning it with carb cleaner just to make sure that is the problem.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 22, 2005
#5
  • Jun 22, 2005
  • #5
Remove the IAC and spray it out thoroughly with carb cleaner and then reinstall.

For the MAF here are step by step instructions with pics courtesy of the Bullitt Archive:
http://www.bullittarchive.com/html/modules/articles/article.php?id=77
 
S

SigmaPride

New Member
Mar 31, 2005
170
0
0
Jun 22, 2005
#6
  • Jun 22, 2005
  • #6
lockw33d said:
How do i clean the MAF, and IAC
Click to expand...

I wouldn't touch the MAF until you try the IAC. I've never had a MAF problem at 95k miles. Search this forum on cleaning the IAC. You just take off the hose...two bolts...and you should see carbon buildup. You can spray carb cleaner in there and wipe it out.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 22, 2005
#7
  • Jun 22, 2005
  • #7
It really depends on if you are using paper air filters. If you are using paper air filters then the MAF is probably fine. But why not clean it? You do have to get a tamper proof torx bit though so it is not a completely cost free fix...
 

lockw33d

New Member
May 10, 2005
64
0
0
Jun 22, 2005
#8
  • Jun 22, 2005
  • #8
stopping on teh way home and gettng some carb cleaner. Thanks guys. Let you knwo tomorrow.
 

lockw33d

New Member
May 10, 2005
64
0
0
Jun 23, 2005
#9
  • Jun 23, 2005
  • #9
Ok guys, stopped yesterday got some carb cleaner and removed and sprayed carb cleaner in both openings. Started it up and it worked fine. Well this morning go to crank it and guess what. DIES, drive it the whole way to work pumpin gthe gas at every stop. Just wouldnt stay running. Should i maybe replace it?
 
S

SigmaPride

New Member
Mar 31, 2005
170
0
0
Jun 23, 2005
#10
  • Jun 23, 2005
  • #10
lockw33d said:
Ok guys, stopped yesterday got some carb cleaner and removed and sprayed carb cleaner in both openings. Started it up and it worked fine. Well this morning go to crank it and guess what. DIES, drive it the whole way to work pumpin gthe gas at every stop. Just wouldnt stay running. Should i maybe replace it?
Click to expand...

Replacing it fixed mine and I still think that is your problem. My car would randomly have the problem holding idle after starting and then finally got to the point where I had to keep pumping the gas at a stop. It would also occassionally die when coming to a stop after pushing the clutch in.

Cleaning is really a temporary fix. I could be wrong of course, but worth a try especially if you haven't done it before.

I would get one from Randy Stinchcomb over at ModularDepot in the Ford Parts forum.
 

lockw33d

New Member
May 10, 2005
64
0
0
Jun 23, 2005
#11
  • Jun 23, 2005
  • #11
is that a website?? Sorry never heard of it. Yeah mine soind that exact thing. When i put the clutch in it dies.
 
S

SigmaPride

New Member
Mar 31, 2005
170
0
0
Jun 23, 2005
#12
  • Jun 23, 2005
  • #12
www.modulardepot.com

Just create an account over there and look at the Ford Parts forum. You can send Randy Stinchcomb a private message asking him for a price on a new IAC. He pretty much sells at their cost instead of the normal markup. That is just where I get most of my parts.
 
B

B's 96 GT

New Member
Mar 15, 2004
47
0
0
Jun 24, 2005
#13
  • Jun 24, 2005
  • #13
ok, i have the same problem. i put the new IAC on it and it still dies. i pulled one of the other valves off to see how dirty the t/b was and it is filthy, should i get a new t/b or is just a bad IAC and i need another one?
 
D

DGC GT 1

New Member
May 12, 2005
30
0
0
Southern Illinois
Jun 24, 2005
#14
  • Jun 24, 2005
  • #14
Im not sure if its the same problem, but mine would start up but would die if i didnt keep giving it gas. My stang had 60k at this point. I changed the fuel filter and it started right up and i havent had trouble since.
 

96WhiteNight

New Member
May 11, 2004
303
0
0
Carlisle, PA
Jun 24, 2005
#15
  • Jun 24, 2005
  • #15
DGC GT 1 said:
Im not sure if its the same problem, but mine would start up but would die if i didnt keep giving it gas. My stang had 60k at this point. I changed the fuel filter and it started right up and i havent had trouble since.
Click to expand...


Good call check the fuel filter, if its a sensor i would think it would throw the check engine light
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
253
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
277
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
M
2001 cobra ignition timing off
  • Mike3
  • Jul 13, 2026
  • SVT Tech Forum
Replies
9
Views
410
SVT Tech Forum Aug 2, 2026
Mike3
M
L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
368
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?